On Tue, Jul 13, 2010 at 9:19 AM, vijay singh <[email protected]> wrote: > On Mon, 2010-07-12 at 17:05 +0300, Ameya Palande wrote: >> Hi Vijay, >> >> On Mon, 2010-07-12 at 09:05 +0200, ext vijay singh wrote: >> > I have tried image from below location for DevKit8000: >> > >> > //http://wiki.meego.com/ARM/Meego_on_Beagleboard_from_scratch#Make_X_start >> > >> > but i couldn't able to boot kernel. >> >> Can you post the kernel output from serial console and the .config file >> that you used for building this kernel? > > I have used kernel image from below location : > //http://wiki.meego.com/ARM/Meego_on_the_Beagle > Check for section "Steps to modify an N900 image for BeagleBoard " >
Hi, Shouldn't you be running devkit8000 kernel instead? Check the following thread to get the devkit8000 kernel and uboot source links: http://groups.google.com/group/beagleboard/browse_thread/thread/3e02302066a6c003?pli=1 regards, Amit Pundir > Serial console O/P : > > ******************************************************************* > Texas Instruments X-Loader 1.41 > Starting OS Bootloader... > U-Boot 1.3.3-svn333 (Sep 10 2009 - 16:49:01) > > OMAP3530-GP rev 2, CPU-OPP2 L3-165MHz > OMAP3 DevKit8000 Board + LPDDR/NAND > DRAM: 128 MB > NAND: 128 MiB > In: serial > Out: serial > Err: serial > > Hit any key to stop autoboot: 0 > > OMAP3 DevKit8000 # setenv bootargs 'console=ttyS2,115200n8 > root=/dev/mmcblk0p3 rootdelay=1' > OMAP3 DevKit8000 # mmcinit > OMAP3 DevKit8000 # fatload mmc 0 82000000 uImage > > reading uImage > > 1986880 bytes read > > OMAP3 DevKit8000 # bootm 82000000 > ## Booting kernel from Legacy Image at 82000000 ... > Image Name: Linux-2.6.34-beagle > Image Type: ARM Linux Kernel Image (uncompressed) > Data Size: 1986816 Bytes = 1.9 MB > Load Address: 80008000 > Entry Point: 80008000 > Verifying Checksum ... OK > Loading Kernel Image ... OK > OK > Starting kernel ... > Uncompressing Linux... done, booting the kernel. > ******************************************************************* > > After that nothing will happen. > > Please let me know boot arg are correct ?? > or Do i have to use other configuration. > > If you have working configuration then please send it to me. > > > Regards, > vij > >> >> Cheers, >> Ameya. >> >> _______________________________________________ >> MeeGo-dev mailing list >> [email protected] >> http://lists.meego.com/listinfo/meego-dev > > > _______________________________________________ > MeeGo-dev mailing list > [email protected] > http://lists.meego.com/listinfo/meego-dev > _______________________________________________ MeeGo-dev mailing list [email protected] http://lists.meego.com/listinfo/meego-dev
