I dont know if this is helpful but, I was able to run meego in VMWare, I think 
it's possible to convert the available image.

-Cody

----- Original message -----
> 
> On Jul 13, 2010, at 05:27, ext Tom Chen wrote:
> 
> > Could some Nokia guys give some good docs for how to build and run
> > N900 image with Qemu? it looks a little docs about N900. 
> 
> There's not that much magic involved when comparing how you do it with a
> real N900 vs QEMU.
> 
> First you need to get the rootfs and kernel images built for N900, I'm
> using the prebuilt "MeeGo 1.0 for Nokia N900" images for this example
> (wiki.meego.com/ARM/N900/Releases/1.0). How to build images for the N900
> is another topic altogether which I'm not going into here.
> 
> Next, you need to get a NAND image for QEMU which contains a suitable
> bootloader for the N900. I think the easiest way is to use the existing
> QEMU N900 NAND image for the first MeeGo code drop
> (http://wiki.meego.com/ARM/Meego_on_Qemu).
> 
> "Flash" the new Meego N900 kernel in the QEMU NAND image, i.e. "qflasher
> -m rx51 -k
> meego-n900-open-armv7l-1.0.0.20100525.1-vmlinuz-2.6.33.3-11.2-n900 -o
> meego_qemu_nand.img -yk". You can get the qflasher tool from the same
> place where meego_qemu_nand.img is available.
> 
> Now, just execute QEMU with the MeeGo SD card image built for the N900:
> "qemu-system-arm -M n900 -mtdblock meego_qemu_nand.img -sd empty -sd
> meego-n900-open-armv7l-1.0.0.20100525.1-sda.raw -serial stdio". The
> first "-sd" option is needed to bypass the internal memory card of the
> emulated device, here I'm just passing an empty file for it ("empty", a
> file I created simply by running "echo >empty"). The last option will
> get you the serial root console in the shell where you launched QEMU.
> 
> 
> Regards,
> Juha
> 
> _______________________________________________
> MeeGo-dev mailing list
> [email protected]
> http://lists.meego.com/listinfo/meego-dev

_______________________________________________
MeeGo-dev mailing list
[email protected]
http://lists.meego.com/listinfo/meego-dev

Reply via email to