Hello,
Meego can boot in qemu now, but there is only a bash shell. From the console it
ends with
-----------------------------------------------------------------
Welcome to Moblin
[ OK ]
MeeGo release 1.0 (MeeGo)
Kernel 2.6.28-2.1-n900 on an armv7l
localhost.localdomain login: udevd-work[71]: error opening
ATTR{/sys/class/sound/controlC0/../uevent} for writing: No such file or
directory
Unknown HZ value! (93) Assume 100.
-----------------------------------------------------------------
The command line is "qemu-system-arm -M n900 -mtdblock meego_qemu_nand.img -sd
empty -sd meego-codedrop-arm-n900-closed-201003311635.ubiimg -serial stdio".
Adding/removing those -sd options make no difference. Any suggestions?
----------------
Best Regards,
Brook Hong
>-----Original Message-----
>From: [email protected] [mailto:[email protected]]
>On Behalf Of Riihimaki Juha (Nokia-MS/Helsinki)
>Sent: Wednesday, August 04, 2010 1:12 PM
>To: [email protected]
>Subject: Re: [MeeGo-dev] Dose anyone run Meego of N900 image in QEMU
>successfully?
>
>
>On Aug 4, 2010, at 04:55, ext Sylvia Liu wrote:
>
>> I wonder if another method will also work:
>> - with qflasher, replace both kernel and ubi-fs on the
>> meego_qemu_nand.img, and start the img as mtdblock.
>> I used to try it, but failed. I want to know is the idea a right
>> direction? Is that possible to start the img that way?
>
>In principle it is possible, we used that approach with the first code
>drop qemu image where everything was installed on the nand image. Using
>this method of course requires that the rootfs image is small enough to
>fit in the nand and the kernel you are using is capable of locating and
>mounting the ubifs volume.
>
>
>Regards,
>Juha
>_______________________________________________
>MeeGo-dev mailing list
>[email protected]
>http://lists.meego.com/listinfo/meego-dev
_______________________________________________
MeeGo-dev mailing list
[email protected]
http://lists.meego.com/listinfo/meego-dev
