Hi, Thanks for your reminding.
On Wed, 2010-08-25 at 08:55 +0200, Carsten Munk wrote: > 2010/8/25 [email protected] <[email protected]>: > > Hi all, > > > > I tried to install moblin/meego(netbook ux) in one machine with > > Intel(CPU) + ATI(GPU), after installed the official driver(ATI > > Catalyst™ Display Driver 10.7) it could launch normally, but it is too > > slow to do anything in the system. > > > > By the 'top', I found that the CPU load is up to 40-90% caused by Xorg > > process, it seems that the hardware acceleration takes no efforts. > > Additional clues such as Xorg.0.log contents might be useful. > > Best regards, > Carsten Munk
X.Org X Server 1.7.1 Release Date: 2009-10-23 X Protocol Version 11, Revision 0 Build Operating System: 2.6.18-164.2.1.el5 Current Operating System: Linux localhost.localdomain 2.6.31.5-127.fc12.i686.PAE #1 SMP Sat Nov 7 21:25:57 EST 2009 i686 Kernel command line: ro root=UUID=a3e67083-feaa-494c-a013-704f07a45170 LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us 3 Build Date: 05 November 2009 07:43:20PM Build ID: xorg-x11-server 1.7.1-7.fc12 Current version of pixman: 0.16.2 Before reporting problems, check http://bodhi.fedoraproject.org/ to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Wed Aug 25 13:32:48 2010 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "aticonfig Layout" (**) |-->Screen "aticonfig-Screen[0]-0" (0) (**) | |-->Monitor "aticonfig-Monitor[0]-0" (**) | |-->Device "aticonfig-Device[0]-0" (==) Automatically adding devices (==) Automatically enabling devices (==) FontPath set to: catalogue:/etc/X11/fontpath.d, built-ins (==) ModulePath set to "/usr/lib/xorg/modules" (II) Cannot locate a core pointer device. (II) Cannot locate a core keyboard device. (II) The server relies on HAL to provide the list of input devices. If no devices become available, reconfigure HAL or disable AllowEmptyInput. (II) Loader magic: 0x821b0a0 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 6.0 X.Org XInput driver : 7.0 X.Org Server Extension : 2.0 (--) using VT number 7 (--) PCI:*(0:2:0:0) 1002:68c1:1025:0379 ATI Technologies Inc rev 0, Mem @ 0xd0000000/268435456, 0xcfee0000/131072, I/O @ 0x00002000/256, BIOS @ 0x????????/131072 (II) "extmod" will be loaded by default. (II) "dbe" will be loaded by default. (II) "glx" will be loaded by default. (II) "record" will be loaded by default. (II) "dri" will be loaded by default. (II) "dri2" will be loaded by default. (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.7.1, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension SELinux (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.7.1, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions/libglx.so (II) Module glx: vendor="FireGL - ATI Technologies Inc." compiled for 7.5.0, module version = 1.0.0 (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.7.1, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.7.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.7.1, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "fglrx" (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so (II) Module fglrx: vendor="FireGL - ATI Technologies Inc." compiled for 1.7.1, module version = 8.75.5 Module class: X.Org Video Driver (II) Loading sub module "fglrxdrm" (II) LoadModule: "fglrxdrm" (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc." compiled for 1.7.1, module version = 8.75.5 (II) ATI Proprietary Linux Driver Version Identifier:8.75.5 (II) ATI Proprietary Linux Driver Release Identifier: 8.753 (II) ATI Proprietary Linux Driver Build Date: Jun 29 2010 22:07:36 (II) Primary Device is: PCI 0...@00:00:0 (WW) Falling back to old probe method for fglrx (II) Loading PCS database from /etc/ati/amdpcsdb (--) Chipset Supported AMD Graphics Processor (0x68C1) found (WW) fglrx: No matching Device section for instance (BusID PCI:0...@2:0:1) found (II) AMD Video driver is running on a device belonging to a group targeted for this release (II) AMD Video driver is signed (II) fglrx(0): pEnt->device->identifier=0x985d5a8 (II) fglrx(0): === [atiddxPreInit] === begin (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib/xorg/modules/libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.7.1, module version = 0.1.0 ABI class: X.Org Video Driver, version 6.0 (**) fglrx(0): Depth 24, (--) framebuffer bpp 32 (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) (==) fglrx(0): Default visual is TrueColor (**) fglrx(0): Option "DPMS" "true" (==) fglrx(0): RGB weight 888 (II) fglrx(0): Using 8 bits per RGB (==) fglrx(0): Buffer Tiling is ON (II) Loading sub module "fglrxdrm" (II) LoadModule: "fglrxdrm" (II) Reloading /usr/lib/xorg/modules/linux/libfglrxdrm.so ukiDynamicMajor: found major device number 249 ukiDynamicMajor: found major device number 249 ukiOpenByBusid: Searching for BusID PCI:2:0:0 ukiOpenDevice: node name is /dev/ati/card0 ukiOpenDevice: open result is 13, (OK) ukiOpenByBusid: ukiOpenMinor returns 13 ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0 (==) fglrx(0): NoAccel = NO (==) fglrx(0): ATI 2D Acceleration Architecture enabled (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 5600/5700 Series" (Chipset = 0x68c1) (--) fglrx(0): (PciSubVendor = 0x1025, PciSubDevice = 0x0379) (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000 (--) fglrx(0): MMIO registers at 0xcfee0000 (--) fglrx(0): I/O port at 0x00002000 (==) fglrx(0): ROM-BIOS at 0x000c0000 (II) fglrx(0): ATIF platform detected (II) fglrx(0): AC Adapter is used (II) fglrx(0): Primary V_BIOS segment is: 0xc000 (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/lib/xorg/modules/libvbe.so (II) Module vbe: vendor="X.Org Foundation" compiled for 1.7.1, module version = 1.1.0 ABI class: X.Org Video Driver, version 6.0 (II) fglrx(0): VESA BIOS detected (II) fglrx(0): VESA VBE Version 3.0 (II) fglrx(0): VESA VBE Total Mem: 16384 kB (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS (II) fglrx(0): VESA VBE OEM Software Rev: 12.19 (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. (II) fglrx(0): VESA VBE OEM Product: MADISON (II) fglrx(0): VESA VBE OEM Product Rev: 01.00 (II) fglrx(0): ATI Video BIOS revision 9 or later detected (--) fglrx(0): Video RAM: 1048576 kByte, Type: DDR3 (II) fglrx(0): PCIE card detected (--) fglrx(0): Using per-process page tables (PPPT) as GART. (WW) fglrx(0): board is an unknown third party board, chipset is supported (II) fglrx(0): Using adapter: 2:0.0. (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000) (II) fglrx(0): Interrupt handler installed at IRQ 32. (II) fglrx(0): RandR 1.2 support is enabled! (II) fglrx(0): RandR 1.2 rotation support is enabled! (==) fglrx(0): Center Mode is disabled (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.7.1, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) fglrx(0): Finished Initialize PPLIB! (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) fglrx(0): Connected Display0: LCD on internal LVDS [lvds] (II) fglrx(0): Display0 EDID data --------------------------- (II) fglrx(0): Manufacturer: SEC Model: 3051 Serial#: 0 (II) fglrx(0): Year: 2008 Week: 0 (II) fglrx(0): EDID Version: 1.3 (II) fglrx(0): Digital Display Input (II) fglrx(0): Max Image Size [cm]: horiz.: 39 vert.: 23 (II) fglrx(0): Gamma: 2.20 (II) fglrx(0): No DPMS capabilities specified (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 (II) fglrx(0): First detailed timing is preferred mode (II) fglrx(0): redX: 0.600 redY: 0.340 greenX: 0.310 greenY: 0.560 (II) fglrx(0): blueX: 0.150 blueY: 0.130 whiteX: 0.313 whiteY: 0.329 (II) fglrx(0): Manufacturer's mask: 0 (II) fglrx(0): Supported detailed timing: (II) fglrx(0): clock: 107.8 MHz Image Size: 398 x 232 mm (II) fglrx(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1892 h_border: 0 (II) fglrx(0): v_active: 900 v_sync: 902 v_sync_end 908 v_blanking: 950 v_border: 0 (II) fglrx(0): Unknown vendor-specific block f (II) fglrx(0): SAMSUNG (II) fglrx(0): 173KT01-A01 (II) fglrx(0): EDID (in hex): (II) fglrx(0): 00ffffffffffff004ca3513000000000 (II) fglrx(0): 00120103802717780a859599574f8f26 (II) fglrx(0): 21505400000001010101010101010101 (II) fglrx(0): 010101010101202a4024618432303020 (II) fglrx(0): 26008ee8100000190000000f00000000 (II) fglrx(0): 00000000001eb4027400000000fe0053 (II) fglrx(0): 414d53554e470a2020202020000000fe (II) fglrx(0): 003137334b5430312d4130310a2000a4 (II) fglrx(0): End of Display0 EDID data -------------------- (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0 (II) fglrx(0): Output DFP1 has no monitor section (II) fglrx(0): Output CRT1 has no monitor section (II) fglrx(0): EDID vendor "SEC", prod id 12369 (II) fglrx(0): Printing DDC gathered Modelines: (II) fglrx(0): Modeline "1600x900"x0.0 107.84 1600 1648 1680 1892 900 902 908 950 -hsync -vsync (57.0 kHz) (II) fglrx(0): Output LVDS connected (II) fglrx(0): Output DFP1 disconnected (II) fglrx(0): Output CRT1 disconnected (II) fglrx(0): Using exact sizes for initial modes (II) fglrx(0): Output LVDS using initial mode 1600x900 (II) fglrx(0): Display dimensions: (390, 230) mm (II) fglrx(0): DPI set to (104, 99) (II) fglrx(0): Adapter ATI Mobility Radeon HD 5600/5700 Series has 2 configurable heads and 1 displays connected. (==) fglrx(0): QBS disabled (==) fglrx(0): PseudoColor visuals disabled (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (==) fglrx(0): NoDRI = NO (==) fglrx(0): Capabilities: 0x00000000 (==) fglrx(0): CapabilitiesEx: 0x00000000 (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so" (==) fglrx(0): UseFastTLS=0 (==) fglrx(0): BlockSignalsOnLock=1 (--) Depth 24 pixmap format is 32 bpp (II) Loading extension ATIFGLRXDRI (II) fglrx(0): doing swlDriScreenInit (II) fglrx(0): swlDriScreenInit for fglrx driver ukiDynamicMajor: found major device number 249 ukiDynamicMajor: found major device number 249 ukiDynamicMajor: found major device number 249 ukiOpenByBusid: Searching for BusID PCI:2:0:0 ukiOpenDevice: node name is /dev/ati/card0 ukiOpenDevice: open result is 19, (OK) ukiOpenByBusid: ukiOpenMinor returns 19 ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0 (II) fglrx(0): [uki] DRM interface version 1.0 (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:2:0:0" (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000 (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0xb7866000 (II) fglrx(0): [uki] framebuffer handle = 0x3000 (II) fglrx(0): [uki] added 1 reserved context for kernel (II) fglrx(0): swlDriScreenInit done (II) fglrx(0): Kernel Module Version Information: (II) fglrx(0): Name: fglrx (II) fglrx(0): Version: 8.75.5 (II) fglrx(0): Date: Jun 29 2010 (II) fglrx(0): Desc: ATI FireGL DRM kernel module (II) fglrx(0): Kernel Module version matches driver. (II) fglrx(0): Kernel Module Build Time Information: (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.31.5-127.fc12.i686.PAE (II) fglrx(0): Build-Kernel MODVERSIONS: no (II) fglrx(0): Build-Kernel __SMP__: yes (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000 (II) fglrx(0): [uki] register handle = 0x00004000 (II) fglrx(0): Display width adjusted to to 1664 due to alignment constraints (II) fglrx(0): DRI initialization successfull! (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x010a8000 (II) fglrx(0): FBMM initialized for area (0,0)-(1664,2624) (II) fglrx(0): FBMM auto alloc for area (0,0)-(1664,1664) (front color buffer - assumption) (II) fglrx(0): Largest offscreen area available: 1664 x 960 (==) fglrx(0): Backing store disabled (II) Loading extension FGLRXEXTENSION (**) fglrx(0): DPMS enabled (II) fglrx(0): Initialized in-driver Xinerama extension (**) fglrx(0): Textured Video is enabled. (II) LoadModule: "glesx" (II) Loading /usr/lib/xorg/modules/glesx.so (II) Module glesx: vendor="X.Org Foundation" compiled for 1.7.1, module version = 1.0.0 (II) Loading extension GLESX (II) fglrx(0): GLESX enableFlags = 592 (II) fglrx(0): GLESX is enabled (II) fglrx(0): Acceleration enabled (II) LoadModule: "amdxmm" (II) Loading /usr/lib/xorg/modules/amdxmm.so (II) Module amdxmm: vendor="X.Org Foundation" compiled for 1.7.1, module version = 1.0.0 (II) Loading extension AMDXVOPL (II) fglrx(0): UVD2 feature is available (II) fglrx(0): Enable composite support successfully (WW) fglrx(0): Option "VendorName" is not used (WW) fglrx(0): Option "ModelName" is not used (II) fglrx(0): X context handle = 0x1 (II) fglrx(0): [DRI] installation complete (==) fglrx(0): Silken mouse enabled (==) fglrx(0): Using HW cursor of display infrastructure! (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2. (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel' (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel' (--) RandR disabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE SELinux: Disabled on system, not enabling in X server ukiDynamicMajor: found major device number 249 ukiDynamicMajor: found major device number 249 ukiOpenByBusid: Searching for BusID PCI:2:0:0 ukiOpenDevice: node name is /dev/ati/card0 ukiOpenDevice: open result is 20, (OK) ukiOpenByBusid: ukiOpenMinor returns 20 ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0 (II) AIGLX: Loaded and initialized /usr/X11R6/lib/modules/dri/fglrx_dri.so (II) GLX: Initialized DRI GL provider for screen 0 record: RECORD extension enabled at configure time. record: This extension is known to be broken, disabling extension now.. record: http://bugs.freedesktop.org/show_bug.cgi?id=20500 (II) fglrx(0): Enable the clock gating! (II) fglrx(0): Setting screen physical size to 423 x 238 (II) config/hal: Adding input device AT Translated Set 2 keyboard (II) LoadModule: "evdev" (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.7.0, module version = 2.3.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 7.0 (**) AT Translated Set 2 keyboard: always reports core events (**) AT Translated Set 2 keyboard: Device: "/dev/input/event4" (II) AT Translated Set 2 keyboard: Found keys (II) AT Translated Set 2 keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105+inet" (**) Option "xkb_layout" "us" (**) Option "xkb_options" "terminate:ctrl_alt_bksp" (II) config/hal: Adding input device Macintosh mouse button emulation (**) Macintosh mouse button emulation: always reports core events (**) Macintosh mouse button emulation: Device: "/dev/input/event3" (II) Macintosh mouse button emulation: Found 3 mouse buttons (II) Macintosh mouse button emulation: Found relative axes (II) Macintosh mouse button emulation: Found x and y relative axes (II) Macintosh mouse button emulation: Configuring as mouse (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5 (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE) (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1 (**) Macintosh mouse button emulation: (accel) acceleration profile 0 (II) Macintosh mouse button emulation: initialized for relative axes. (II) config/hal: Adding input device SynPS/2 Synaptics TouchPad (II) LoadModule: "synaptics" (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so (II) Module synaptics: vendor="X.Org Foundation" compiled for 1.6.99.900, module version = 1.1.99 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 7.0 (II) Synaptics touchpad driver version 1.1.99.1 (**) Option "Device" "/dev/input/event5" (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255 (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0 (II) SynPS/2 Synaptics TouchPad: buttons: left right middle (--) SynPS/2 Synaptics TouchPad: touchpad found (**) SynPS/2 Synaptics TouchPad: always reports core events (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD) (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0 (--) SynPS/2 Synaptics TouchPad: touchpad found (II) config/hal: Adding input device 1.3M WebCam (**) 1.3M WebCam: always reports core events (**) 1.3M WebCam: Device: "/dev/input/event7" (II) 1.3M WebCam: Found keys (II) 1.3M WebCam: Configuring as keyboard (II) XINPUT: Adding extended input device "1.3M WebCam" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (II) config/hal: Adding input device Sleep Button (**) Sleep Button: always reports core events (**) Sleep Button: Device: "/dev/input/event2" (II) Sleep Button: Found keys (II) Sleep Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (II) config/hal: Adding input device Video Bus (**) Video Bus: always reports core events (**) Video Bus: Device: "/dev/input/event6" (II) Video Bus: Found keys (II) Video Bus: Configuring as keyboard (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (II) config/hal: Adding input device Power Button (**) Power Button: always reports core events (**) Power Button: Device: "/dev/input/event0" (II) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments (II) fglrx(0): EDID vendor "SEC", prod id 12369 (II) fglrx(0): Printing DDC gathered Modelines: (II) fglrx(0): Modeline "1600x900"x0.0 107.84 1600 1648 1680 1892 900 902 908 950 -hsync -vsync (57.0 kHz) (II) fglrx(0): EDID vendor "SEC", prod id 12369 (II) fglrx(0): Printing DDC gathered Modelines: (II) fglrx(0): Modeline "1600x900"x0.0 107.84 1600 1648 1680 1892 900 902 908 950 -hsync -vsync (57.0 kHz) (II) fglrx(0): EDID vendor "SEC", prod id 12369 (II) fglrx(0): Printing DDC gathered Modelines: (II) fglrx(0): Modeline "1600x900"x0.0 107.84 1600 1648 1680 1892 900 902 908 950 -hsync -vsync (57.0 kHz) (II) fglrx(0): EDID vendor "SEC", prod id 12369 (II) fglrx(0): Printing DDC gathered Modelines: (II) fglrx(0): Modeline "1600x900"x0.0 107.84 1600 1648 1680 1892 900 902 908 950 -hsync -vsync (57.0 kHz) (II) fglrx(0): EDID vendor "SEC", prod id 12369 (II) fglrx(0): Printing DDC gathered Modelines: (II) fglrx(0): Modeline "1600x900"x0.0 107.84 1600 1648 1680 1892 900 902 908 950 -hsync -vsync (57.0 kHz)
_______________________________________________ MeeGo-dev mailing list [email protected] http://lists.meego.com/listinfo/meego-dev
