Hi, Thanks, but the problem with Aava device is that no manual tinkering being possible, as there is no minicom kind of connectivity or test JIGs available. Kernel with g_ether may be the option. Why is it not being present already?
Best Regards, Sajeev Manikkoth MeeGo SW R&D Phone: +918040159000 - Ext: 5338 Hand Phone: +919663311378 >-----Original Message----- >From: ext Timo Härkönen [mailto:[email protected]] >Sent: Thursday, September 02, 2010 9:59 AM >To: Manikkoth Sajeev (Nokia-MS/Bangalore) >Cc: [email protected] >Subject: RE: [MeeGo-dev] [QA-tools] g_ether module for all targets? > >Hi > >On Wed, 2010-09-01 at 08:36 +0300, [email protected] wrote: >> Hi, >> >> Is this functionality or any work around available to establish USB IP >networking on MeeGo Aava device and the linux host? >> > >You need to rebuild the kernel with g_ether (drivers/usb/gadget/) to get >usb networking (and configure the interface). > >You can also use wifi or any other connection for host based test >execution. If you only need to enable host based test execution you can >do it with a little manual tinkering. > >see http://wiki.meego.com/Quality/QA-tools/Autotest-guide#Other_devices > >-Timo > >> >> Best Regards, >> Sajeev Manikkoth >> MeeGo SW R&D >> Phone: +918040159000 - Ext: 5338 >> Hand Phone: +919663311378 >> >> >-----Original Message----- >> >From: [email protected] [mailto:[email protected]] >On >> >Behalf Of ext Timo Härkönen >> >Sent: Friday, August 27, 2010 12:27 PM >> >To: [email protected] >> >Subject: [MeeGo-dev] [QA-tools] g_ether module for all targets? >> > >> >Hi >> > >> >As far as I understand only kernel for N900 images has g_ether and allow >> >IP connection through USB. Would it be possible to compile the module >> >also for all the other targets also? >> > >> >Background for this is that we're looking for a generic way to do host >> >based test execution on all reference devices. At least for me USB >> >networking seems like the way to do it. >> > >> >Basically the setup is done so that there's private network between the >> >host machine (192.168.2.14) and the device under test (192.168.2.15) and >> >the tests are executed from the host over ssh using testrunner-lite. >> > >> >-Timo >> > >> >_______________________________________________ >> >MeeGo-dev mailing list >> >[email protected] >> >http://lists.meego.com/listinfo/meego-dev > _______________________________________________ MeeGo-dev mailing list [email protected] http://lists.meego.com/listinfo/meego-dev
