Hi again :) On Thu, 2010-09-02 at 07:49 +0300, Timo Härkönen wrote: > Hi > > On Thu, 2010-09-02 at 07:39 +0300, [email protected] wrote: > > Hi, > > > > Thanks, but the problem with Aava device is that no manual tinkering being > > possible, as there is no minicom kind of connectivity or test JIGs > > available. Kernel with g_ether may be the option. Why is it not being > > present already? > > >
Forgot to mention that manual tinkering is possible if you have openssh-server running on the device. Actually host based test execution depends on that. -Timo > Dunno. Should ask the guys maintaining kernel for aava (I'm hoping they > read this and reply). > > -Timo > > > > > Best Regards, > > Sajeev Manikkoth > > MeeGo SW R&D > > Phone: +918040159000 - Ext: 5338 > > Hand Phone: +919663311378 > > > > > > >-----Original Message----- > > >From: ext Timo Härkönen [mailto:[email protected]] > > >Sent: Thursday, September 02, 2010 9:59 AM > > >To: Manikkoth Sajeev (Nokia-MS/Bangalore) > > >Cc: [email protected] > > >Subject: RE: [MeeGo-dev] [QA-tools] g_ether module for all targets? > > > > > >Hi > > > > > >On Wed, 2010-09-01 at 08:36 +0300, [email protected] wrote: > > >> Hi, > > >> > > >> Is this functionality or any work around available to establish USB IP > > >networking on MeeGo Aava device and the linux host? > > >> > > > > > >You need to rebuild the kernel with g_ether (drivers/usb/gadget/) to get > > >usb networking (and configure the interface). > > > > > >You can also use wifi or any other connection for host based test > > >execution. If you only need to enable host based test execution you can > > >do it with a little manual tinkering. > > > > > >see http://wiki.meego.com/Quality/QA-tools/Autotest-guide#Other_devices > > > > > >-Timo > > > > > >> > > >> Best Regards, > > >> Sajeev Manikkoth > > >> MeeGo SW R&D > > >> Phone: +918040159000 - Ext: 5338 > > >> Hand Phone: +919663311378 > > >> > > >> >-----Original Message----- > > >> >From: [email protected] [mailto:[email protected]] > > >On > > >> >Behalf Of ext Timo Härkönen > > >> >Sent: Friday, August 27, 2010 12:27 PM > > >> >To: [email protected] > > >> >Subject: [MeeGo-dev] [QA-tools] g_ether module for all targets? > > >> > > > >> >Hi > > >> > > > >> >As far as I understand only kernel for N900 images has g_ether and allow > > >> >IP connection through USB. Would it be possible to compile the module > > >> >also for all the other targets also? > > >> > > > >> >Background for this is that we're looking for a generic way to do host > > >> >based test execution on all reference devices. At least for me USB > > >> >networking seems like the way to do it. > > >> > > > >> >Basically the setup is done so that there's private network between the > > >> >host machine (192.168.2.14) and the device under test (192.168.2.15) and > > >> >the tests are executed from the host over ssh using testrunner-lite. > > >> > > > >> >-Timo > > >> > > > >> >_______________________________________________ > > >> >MeeGo-dev mailing list > > >> >[email protected] > > >> >http://lists.meego.com/listinfo/meego-dev > > > > > > > > _______________________________________________ > MeeGo-dev mailing list > [email protected] > http://lists.meego.com/listinfo/meego-dev _______________________________________________ MeeGo-dev mailing list [email protected] http://lists.meego.com/listinfo/meego-dev
