Hi On Thu, 2010-09-02 at 07:39 +0300, [email protected] wrote: > Hi, > > Thanks, but the problem with Aava device is that no manual tinkering being > possible, as there is no minicom kind of connectivity or test JIGs available. > Kernel with g_ether may be the option. Why is it not being present already? >
Dunno. Should ask the guys maintaining kernel for aava (I'm hoping they read this and reply). -Timo > > Best Regards, > Sajeev Manikkoth > MeeGo SW R&D > Phone: +918040159000 - Ext: 5338 > Hand Phone: +919663311378 > > > >-----Original Message----- > >From: ext Timo Härkönen [mailto:[email protected]] > >Sent: Thursday, September 02, 2010 9:59 AM > >To: Manikkoth Sajeev (Nokia-MS/Bangalore) > >Cc: [email protected] > >Subject: RE: [MeeGo-dev] [QA-tools] g_ether module for all targets? > > > >Hi > > > >On Wed, 2010-09-01 at 08:36 +0300, [email protected] wrote: > >> Hi, > >> > >> Is this functionality or any work around available to establish USB IP > >networking on MeeGo Aava device and the linux host? > >> > > > >You need to rebuild the kernel with g_ether (drivers/usb/gadget/) to get > >usb networking (and configure the interface). > > > >You can also use wifi or any other connection for host based test > >execution. If you only need to enable host based test execution you can > >do it with a little manual tinkering. > > > >see http://wiki.meego.com/Quality/QA-tools/Autotest-guide#Other_devices > > > >-Timo > > > >> > >> Best Regards, > >> Sajeev Manikkoth > >> MeeGo SW R&D > >> Phone: +918040159000 - Ext: 5338 > >> Hand Phone: +919663311378 > >> > >> >-----Original Message----- > >> >From: [email protected] [mailto:[email protected]] > >On > >> >Behalf Of ext Timo Härkönen > >> >Sent: Friday, August 27, 2010 12:27 PM > >> >To: [email protected] > >> >Subject: [MeeGo-dev] [QA-tools] g_ether module for all targets? > >> > > >> >Hi > >> > > >> >As far as I understand only kernel for N900 images has g_ether and allow > >> >IP connection through USB. Would it be possible to compile the module > >> >also for all the other targets also? > >> > > >> >Background for this is that we're looking for a generic way to do host > >> >based test execution on all reference devices. At least for me USB > >> >networking seems like the way to do it. > >> > > >> >Basically the setup is done so that there's private network between the > >> >host machine (192.168.2.14) and the device under test (192.168.2.15) and > >> >the tests are executed from the host over ssh using testrunner-lite. > >> > > >> >-Timo > >> > > >> >_______________________________________________ > >> >MeeGo-dev mailing list > >> >[email protected] > >> >http://lists.meego.com/listinfo/meego-dev > > > _______________________________________________ MeeGo-dev mailing list [email protected] http://lists.meego.com/listinfo/meego-dev
