I paid $69 for the control unit to replace my dead one. With
forethought I would have bought an aftermarket HE ignition kit from
Jaycar or the like for about the same. The reason all of the dizzy's
are ignitorless is the fact that they last about 10-15 years then die,
just about all of the factory ones are dead.
Michael Cassidy wrote:
> At the pick a part up here they have shitloads of bluey sII (about 5)
> all with the elec dizzy but without the module (black box). Are the
> black boxes easy to get? If so they could be had very cheap.
>
> Michael
>
> Andrew Schultz wrote:
>
>> "Foreshew, Michael, HiServ/AU" wrote:
>>
>> >
>> >
>> > Want to put an electronic Dizzy into the L18. I understand that
>> > one from the Series III Bluebird will fit. My question is exactly
>> > what bits do I need and roughly the cost?
>> >
>> > Cheers
>> > Michael Foreshew
>> >
>> >
>>
>> Micheal,
>>
>> All you need is the dizzy itself and the matcing coil. You can ditch
>> the ballast resistor. Remember that with the dizzy installed you can
>> gap your plugs wider to make full use of the higher voltages. Better
>> spark=better ignition and smoother slightly more powerful engine.
>>
>> --
>> Regards,
>>
>> Andrew
>>
--
Adam Rowe
<[EMAIL PROTECTED]>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.datascribe.com.au/ozdatonline/index.htm
http://www.datascribe.com.au/ozdatonline/listindex.html
---------------------------------------------------------------------
