Twin square topped SU's.
The jap 180B 810SSS coupe is the only 180B here with 14" wheels aswell.
all 610 180B's here have 13" wheels.even the 5 speed 75 model.
Malcolm
Peter Parry wrote:
>
> Mal twin carbs or single
> Peter
>
> malcolm cooper wrote:
>
> > and in this model we only got 2 d00r SSS L18,but they are mostly all W
> > blocks with W53(same as A87) heads
> >
> > Malcolm
> >
> > Peter Parry wrote:
> > >
> > > Mal spot on these were i beleive the only fully imported 810 to Aus they had
>IRS/2 doors
> > > and again only L20Bs couldnt possibly fit anything with a bit of perforance
>!!!!!!!!!!!
> > > Peter
> > >
> > > malcolm cooper wrote:
> > >
> > > > I had a look in some parts book and came up with this,
> > > >
> > > > The L20B fitted to the 810 SSS made for aussie has a jap made L20B.
> > > >
> > > > Malcolm
> > > >
> > > > Terry & Heather wrote:
> > > > >
> > > > > Malcolm,
> > > > > The Clayton factory had an engine plant, they made the whole kit here and
>exported
> > > > > them as well but i don't recall where to, suckers.. As Peter P says, very
>very bad
> > > > > engines that blew head gaskets, had oval bores and pistons that made good
>ash trays
> > > > > and you needed a gas mask to travel behind one that was a few years old.
> > > > >
> > > > > Terry
> > > > >
> > > > > malcolm cooper wrote:
> > > > >
> > > > > > Was the L20B you guys got cast in oz or just put together in ozzie
> > > > > > The L20B I use is from a jap 200BSSS and for some reason it goes real
> > > > > > well.
> > > > > > But by the book all L20B's are the same.
> > > > > >
> > > > > > Malcolm
> > > > > >
> > > > > > Peter Parry wrote:
> > > > > > >
> > > > > > > MAL I'd better jump in here ALL A and L series motors will run on
>unleaded
> > > > > > > EXCEPT SERIES 2 AUSSIE BLUEBIRDS the high energy motor [black rocker
>cover]
> > > > > > > These shitful engines made in AUS WILL NOT run on unleaded and my own
>thoughts
> > > > > > > on Aussie L20b's is well known
> > > > > > > Peter
> > > > > > >
> > > > > > > malcolm cooper wrote:
> > > > > > >
> > > > > > > > l20b FROM THE 810 200b MODEL
> > > > > > > > As in gas even the 1970 L16 is meant to run on unleaded
> > > > > > > >
> > > > > > > > Malcolm
> > > > > > > > P.S
> > > > > > > > But remember the higher the octane the better the ride.
> > > > > > > >
> > > > > > > > wak dog wrote:
> > > > > > > > >
> > > > > > > > > hey guys... i am a p510 owner and purchased the car with an l20b
>engine in
> > > > > > > > > it.... i was wondering if you could please tell me what car the
>engine is
> > > > > > > > > out of n what petrol it requires...
> > > > > > > > > also some info on other common engine swap would be great...
> > > > > > > > > thanx...
> > > > > > > > >
>________________________________________________________________________
> > > > > > > > > Get Your Private, Free E-mail from MSN Hotmail at
>http://www.hotmail.com
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.datascribe.com.au/ozdatonline/index.htm
http://www.datascribe.com.au/ozdatonline/listindex.html
---------------------------------------------------------------------
