Mal thanks better than our plain jans single carb You can probably see that we have
been fed crap
and kerpt in the dark we must be mushrooms
Peter
malcolm cooper wrote:
> Twin square topped SU's.
> The jap 180B 810SSS coupe is the only 180B here with 14" wheels aswell.
> all 610 180B's here have 13" wheels.even the 5 speed 75 model.
>
> Malcolm
>
> Peter Parry wrote:
> >
> > Mal twin carbs or single
> > Peter
> >
> > malcolm cooper wrote:
> >
> > > and in this model we only got 2 d00r SSS L18,but they are mostly all W
> > > blocks with W53(same as A87) heads
> > >
> > > Malcolm
> > >
> > > Peter Parry wrote:
> > > >
> > > > Mal spot on these were i beleive the only fully imported 810 to Aus they had
>IRS/2 doors
> > > > and again only L20Bs couldnt possibly fit anything with a bit of perforance
>!!!!!!!!!!!
> > > > Peter
> > > >
> > > > malcolm cooper wrote:
> > > >
> > > > > I had a look in some parts book and came up with this,
> > > > >
> > > > > The L20B fitted to the 810 SSS made for aussie has a jap made L20B.
> > > > >
> > > > > Malcolm
> > > > >
> > > > > Terry & Heather wrote:
> > > > > >
> > > > > > Malcolm,
> > > > > > The Clayton factory had an engine plant, they made the whole kit here and
>exported
> > > > > > them as well but i don't recall where to, suckers.. As Peter P says, very
>very bad
> > > > > > engines that blew head gaskets, had oval bores and pistons that made good
>ash trays
> > > > > > and you needed a gas mask to travel behind one that was a few years old.
> > > > > >
> > > > > > Terry
> > > > > >
> > > > > > malcolm cooper wrote:
> > > > > >
> > > > > > > Was the L20B you guys got cast in oz or just put together in ozzie
> > > > > > > The L20B I use is from a jap 200BSSS and for some reason it goes real
> > > > > > > well.
> > > > > > > But by the book all L20B's are the same.
> > > > > > >
> > > > > > > Malcolm
> > > > > > >
> > > > > > > Peter Parry wrote:
> > > > > > > >
> > > > > > > > MAL I'd better jump in here ALL A and L series motors will run on
>unleaded
> > > > > > > > EXCEPT SERIES 2 AUSSIE BLUEBIRDS the high energy motor [black rocker
>cover]
> > > > > > > > These shitful engines made in AUS WILL NOT run on unleaded and my own
>thoughts
> > > > > > > > on Aussie L20b's is well known
> > > > > > > > Peter
> > > > > > > >
> > > > > > > > malcolm cooper wrote:
> > > > > > > >
> > > > > > > > > l20b FROM THE 810 200b MODEL
> > > > > > > > > As in gas even the 1970 L16 is meant to run on unleaded
> > > > > > > > >
> > > > > > > > > Malcolm
> > > > > > > > > P.S
> > > > > > > > > But remember the higher the octane the better the ride.
> > > > > > > > >
> > > > > > > > > wak dog wrote:
> > > > > > > > > >
> > > > > > > > > > hey guys... i am a p510 owner and purchased the car with an l20b
>engine in
> > > > > > > > > > it.... i was wondering if you could please tell me what car the
>engine is
> > > > > > > > > > out of n what petrol it requires...
> > > > > > > > > > also some info on other common engine swap would be great...
> > > > > > > > > > thanx...
> > > > > > > > > >
>________________________________________________________________________
> > > > > > > > > > Get Your Private, Free E-mail from MSN Hotmail at
>http://www.hotmail.com
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.datascribe.com.au/ozdatonline/index.htm
http://www.datascribe.com.au/ozdatonline/listindex.html
---------------------------------------------------------------------
