Looking,reading,sharing dat info and e.mailing people to learn more, it
does seam NZ got the best deal.
But only if we got the 2 door 510 that would be the icing on the cake.

But I'll have to stick with a couple of 510SSS instead

Malcolm

Peter Parry wrote:
> 
> Mal thanks better than our plain jans single carb You can probably see that we have 
>been fed crap
> and kerpt in the dark we must be mushrooms
> Peter
> 
> malcolm cooper wrote:
> 
> > Twin square topped SU's.
> > The jap 180B 810SSS coupe is the only 180B here with 14" wheels aswell.
> > all 610 180B's here have 13" wheels.even the 5 speed 75 model.
> >
> > Malcolm
> >
> > Peter Parry wrote:
> > >
> > > Mal twin carbs or single
> > > Peter
> > >
> > > malcolm cooper wrote:
> > >
> > > > and in this model we only got 2 d00r SSS L18,but they are mostly all W
> > > > blocks with W53(same as A87) heads
> > > >
> > > > Malcolm
> > > >
> > > > Peter Parry wrote:
> > > > >
> > > > > Mal spot on these were i beleive the only fully imported 810 to Aus they had 
>IRS/2 doors
> > > > > and again only L20Bs couldnt possibly fit anything with a bit of perforance 
>!!!!!!!!!!!
> > > > > Peter
> > > > >
> > > > > malcolm cooper wrote:
> > > > >
> > > > > > I had a look in some parts book and came up with this,
> > > > > >
> > > > > > The L20B fitted to the 810 SSS made for aussie has a jap made L20B.
> > > > > >
> > > > > > Malcolm
> > > > > >
> > > > > > Terry & Heather wrote:
> > > > > > >
> > > > > > > Malcolm,
> > > > > > > The Clayton factory had an engine plant, they made the whole kit here 
>and exported
> > > > > > > them as well but i don't recall where to, suckers.. As Peter P says, 
>very very bad
> > > > > > > engines that blew head gaskets, had oval bores and pistons that made 
>good ash trays
> > > > > > > and you needed a gas mask to travel behind one that was a few years old.
> > > > > > >
> > > > > > > Terry
> > > > > > >
> > > > > > > malcolm cooper wrote:
> > > > > > >
> > > > > > > > Was the L20B you guys got cast in oz or just put together in ozzie
> > > > > > > > The L20B I use is from a jap 200BSSS and for some reason it goes real
> > > > > > > > well.
> > > > > > > > But by the book all L20B's are the same.
> > > > > > > >
> > > > > > > > Malcolm
> > > > > > > >
> > > > > > > > Peter Parry wrote:
> > > > > > > > >
> > > > > > > > > MAL I'd better jump in here ALL A and L series motors will run on 
>unleaded
> > > > > > > > > EXCEPT SERIES 2 AUSSIE BLUEBIRDS the high energy motor [black rocker 
>cover]
> > > > > > > > > These shitful engines made in AUS WILL NOT run on unleaded and my 
>own thoughts
> > > > > > > > > on Aussie L20b's is well known
> > > > > > > > > Peter
> > > > > > > > >
> > > > > > > > > malcolm cooper wrote:
> > > > > > > > >
> > > > > > > > > > l20b FROM THE 810 200b MODEL
> > > > > > > > > > As in gas even the 1970 L16 is meant to run on unleaded
> > > > > > > > > >
> > > > > > > > > > Malcolm
> > > > > > > > > > P.S
> > > > > > > > > > But remember the higher the octane the better the ride.
> > > > > > > > > >
> > > > > > > > > > wak dog wrote:
> > > > > > > > > > >
> > > > > > > > > > > hey guys... i am a p510 owner and purchased the car with an l20b 
>engine in
> > > > > > > > > > > it.... i was wondering if you could please tell me what car the 
>engine is
> > > > > > > > > > > out of n what petrol it requires...
> > > > > > > > > > > also some info on other common engine swap would be great...
> > > > > > > > > > > thanx...
> > > > > > > > > > > 
>________________________________________________________________________
> > > > > > > > > > > Get Your Private, Free E-mail from MSN Hotmail at 
>http://www.hotmail.com
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> 


--membersozdat-------------------------------------------------------
OZDAT Mailing List   Please Note:-
Send (un)subscribe requests to  [EMAIL PROTECTED]
Send  submissions to  [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.datascribe.com.au/ozdatonline/index.htm
http://www.datascribe.com.au/ozdatonline/listindex.html
---------------------------------------------------------------------

Reply via email to