O so it's not like here and half the price of petorl?
Malcolm
Terry & Heather wrote:
>
> Malcolm,
> Problem in Aus is that diesel is a dear as super (poison) except if you are a primary
> producer. There's to many Torrak (sp? rich suburb of Melb) tractors in Australia and
>the
> govt taxes everyone accordingly.
>
> terry
>
> malcolm cooper wrote:
>
> > its 1.03 here now ,good thing I now run a deisal.
> >
> > Malcolm
> >
> > Terry & Heather wrote:
> > >
> > > Malcolm,
> > > The only LPG Production Datsun in Australia was a 200B, it could have been made
>here
> > > exclusively, I know the one I looked at recently had a Made in Aus gas tank in
>the
> > > back, if they were any good they'd be a cheap run-around these days with the
>price of
> > > petrol gone through the roof again here +10c p/litre more than last week.
> > >
> > > terry
> > >
> > > malcolm cooper wrote:
> > >
> > > > I havn't looked at the 810 book to see if they had LPG but the 710 did
> > > > in 1973.only on the L16 as far as I or the book says.
> > > >
> > > > Malcolm
> > > >
> > > > Terry & Heather wrote:
> > > > >
> > > > > Malcolm,
> > > > > I agree with Errol they were used in the performance 710 L18 SSS in Japan as
> > > > > well, i can't recall ever seeing a W block in the L20B but i don't look at
>many
> > > > > of them anyway. There is substantially increased coolant capacity in the W
> > > > > block as well, just can't recall how much but it's noticeable.
> > > > >
> > > > > Just a thought in closing, was the LPG L20B block used in the 200B anything
> > > > > special? I saw a factory one at a local wreckers a while ago but my only
> > > > > interest was inside the boot.
> > > > >
> > > > > Terry
> > > > >
> > > > > Errol Smith wrote:
> > > > >
> > > > > > Malcom,
> > > > > > I believe the W suffix refers to the cylinder wall thickness (ie thicker
> > > > > > cylinder wall casting to prevent bore flex) this block was mainly used in
> > > > > > industrial/commercial engines or the 610SSS performance engines where
> > > > > > higher cylinder pressures were likely. If I were U I would grab them as the
> > > > > > potential for Z22 cranked strokers would be enormous.
> > > > > > Cheers
> > > > > > Feral Errol
> > > > > > ---------
> > > > > > > From: malcolm cooper <[EMAIL PROTECTED]>
> > > > > > > To: ozdat <[EMAIL PROTECTED]>
> > > > > > > Subject: ATTEN: TERRY
> > > > > > > Date: Wednesday, May 03, 2000 8:11
> > > > > > >
> > > > > > > Hi,
> > > > > > > I have come across two L20B W engines,
> > > > > > > They have the W cast on them afeter the L20B bit just like the L18W.
> > > > > > >
> > > > > > > Do you or anyone else know if these are specail in any way?? .
> > > > > > > It would be nice to know before they are dumped
> > > > > > >
> > > > > > > Malcolm
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> > > --membersozdat-------------------------------------------------------
> > > OZDAT Mailing List Please Note:-
> > > Send (un)subscribe requests to [EMAIL PROTECTED]
> > > Send submissions to [EMAIL PROTECTED]
> > > No unauthorised redistribution of this email
> > > http://www.datascribe.com.au/ozdatonline/index.htm
> > > http://www.datascribe.com.au/ozdatonline/listindex.html
> > > ---------------------------------------------------------------------
> >
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.datascribe.com.au/ozdatonline/index.htm
http://www.datascribe.com.au/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
