so how much do they cost to get made up and who do I contact to organize
this (I'm in W.A)and are they 8'' in diameter or 9 if they are 8'' I can
still use my old pressure plate if 9" any idea's on a good high profile
pressure plate
>Albs,
>I get clutch plates made up using a combination of organic and ceramic
>pucks for high power outputs on street use vehicles. The organic material
>reduces the harshness of the ceramic pucks allowing some early slip but as
>the load is applied by the pressure plate face the ceramic pucks really
>bite!.
>Cheers
>Feral Errol
>----------
>From: Albs <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>Subject: 9'' clutches in a 1600
>Date: Wednesday, July 07, 1999 10:37
>
>Has any one on the list had any experiences or fitted up a 9 inch cluch up
>to there l serires motor before and what parts are required. The reason is
>that the old pressure plate (8'') is cooked and is the heavist of it's type
>(Pro competion type) so the only way to get more grip is either a brass
>button (no give) or a bigger version of the conventional cluch plate.(alot
>smoother which is good for street) cause i can't get anymore clamping
>pressure than i have already ( I would assume)
>Motor z24/l20b e.f.i 200hp out put
>gear box stanza 5 speed
>
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.datascribe.com.au/ozdatonline/index.htm
http://www.datascribe.com.au/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
