Aussie Diff at the Gold Coast,
yerr R31 discs
never owned a car with rear discs

Heath

----- Original Message -----
From: "Errol Smith" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, 27 July 2000 8:54
Subject: Re: live axle mods


> Heath,
> That sounds like the go. Who did the work?
> Cheers
> Feral Errol
>
> ----------
> From: Julian <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Subject: Re: live axle mods
> Date: Wednesday, July 26, 2000 9:02
>
> was that from an IRS skyline? if so, do you know which model?
>
> - Julian
>
> Heath wrote:
>
> > i'm running a 28 spline borg warner4 pinion LSD, skyline axles already
> > four studcost me $800 to get cut down and put newdiff and wheel
> > bearings in.Finally i'll have a car that won't break axles,centres, or
> > even shear off crown and pinion bolts. yippee Heath
> >
> >      ----- Original Message -----
> >      From: abrahamk
> >      To: [EMAIL PROTECTED]
> >      Sent: Monday, 24 July 2000 6:23
> >      Subject: live axle mods
> >       As I understand it,The H165 diff has the diff carrier
> >      installed from the front of the axle case, whereasThe H190
> >      diff has the rear inspection plate arrangement.I am slightly
> >      confused as the Datsun manual apparantly uses the H165
> >      picture for both axles.Also, the H190 is a stronger, tougher
> >      setup Questions...How do diff baffles work? I understand
> >      that they stop oil sloshing ito axle tubes during sustained
> >      cornering. But what kind of clearance is there between the
> >      axle and the hole in the baffle plate?How would you go about
> >      fabricating them, or where could I buy a set? I have heard
> >      that 720 4X4 rear diffs are 2 pinion LSD's, but I've checked
> >      a couple - they could have been non std. or something - and
> >      they were open. Are all 720 4X4's LSD equipped from new or
> >      was it only an option? What are list members' experiences in
> >      this area?Does anyone have a H190 LSD centre for sale or
> >      know where to get one?What about crown wheel and pinion
> >      sets?Finally, has anyone here tried to deal direct with
> >      NISMO?Thanks in advance,Nick
> >
> >
> >
>
  -membersozdat-------------------------------------------------------
> >
> >      OZDAT Mailing List Please Note:-
> >      Send (un)subscribe requests to [EMAIL PROTECTED]
> >      Send submissions to [EMAIL PROTECTED]
> >      No unauthorised redistribution of this email
> >      http://www.ozdat.com/ozdatonline/index.htm
> >      http://www.ozdat.com/ozdatonline/listindex.html
> >      http://www.mail-archive.com/[email protected]/
> >      -----------------------------------------------------------
> >      ---------
> >
> >
> > --membersozdat-------------------------------------------------------
> > OZDAT Mailing List Please Note:-
> > Send (un)subscribe requests to [EMAIL PROTECTED]
> > Send submissions to [EMAIL PROTECTED]
> > No unauthorised redistribution of this email
> > http://www.ozdat.com/ozdatonline/index.htm
> > http://www.ozdat.com/ozdatonline/listindex.html
> > http://www.mail-archive.com/[email protected]/
> > ---------------------------------------------------------------------
>
>
>

--membersozdat-------------------------------------------------------
OZDAT Mailing List   Please Note:-
Send (un)subscribe requests to  [EMAIL PROTECTED]
Send  submissions to  [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------

Reply via email to