yeah i know its an early model and believe me im gonna look after it, im
never gonna sell it. Well i say that now but im only 18. Its had a very hard
life before i got it as it was used as a burnout machine by a couple of
guys. but its got the v/n P510 003161 but i know theres a few ppl on the
list who know of a lot earlier ones. If u wanna see a few very limited pics
theyre on www.datnet.org but i hope to have a lot more once the weather
permits me to take a few good ones.As for the 70s one ive seen it in one of
our other car and it looks very easy to take out the steering box etc. Is
any one sure on the parts needed to swap one over as im not prepared to pay
what they want for me to rebuild the steering box. As for parts thats no
worries as i said we have a 70 in the back garden and were on the lookout
for another one thanks for ur info. :)
Chris
>From: "Richard Clough" <[EMAIL PROTECTED]>
>Reply-To: [EMAIL PROTECTED]
>To: <[EMAIL PROTECTED]>
>Subject: Re: more steering box stuff
>Date: Sat, 29 Jul 2000 18:03:47 +1000
>
>You have the fully imported early type steering box/column fitted to all
>'68
>models as these were built in Japan. Look after your car, it has a much
>better shell than a locally built one.
>
>My Jap built 1600SSS still had this column in 1971, but from '70 on Oz
>built
>cars had the separate box with the collapsible column and uni joint
>connecting the column to the box.
>
>You can bolt the later column/box into your car, but you may also need
>change the drag link and tie rods as these were larger dia than the early
>ones and yours may not bolt up to the later pitman arm..
>----- Original Message -----
>From: "FJ MAN" <[EMAIL PROTECTED]>
>To: <[EMAIL PROTECTED]>
>Sent: Wednesday, 26 July 2000 18:40 PM
>Subject: more steering box stuff
>
>
> >
> > now that this topik is taking over the list id just like sum advise.
> > we have 3 1600s and all have different steering boxes. mine is a 68 and
>it
> > has the solid tube into the top of sttering box held in by 3 bolts. Ive
>been
> > told this is a bitch to remove, and if i choose to go with anuva type of
> > steering box then im gonna need the steering shaft etc from that model.
>Can
> > anyone here gimme advise on what to do in this situation. or if i could
>weld
> > a flexy joint to the end of the steering shaft as ive seen on another
>1600
> > im unsure what steering box they were using in that instance. thanks
> > Chris
> > ________________________________________________________________________
> > Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
> >
>
________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
