yep i agree
i ordered a set of adjustable castor rods at 4pm one day and they were in my
hands on the gold coast the next morning.. now thats what i call service!!
cheers
mick
----- Original Message -----
From: Pete & Kath Liebig <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, August 03, 2000 10:53 PM
Subject: SSS
> I must admit they have been pretty decent to me too...
>
> PL
>
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]] On Behalf Of Terry & Heather
> Sent: Tuesday, 1 August 2000 18:14
> To: [EMAIL PROTECTED]
> Subject: RE: Tailshaft Spline Questions!
>
> Geordie,
>
> I take it you didn't buy the engine from them as they do treat their
> customers pretty well. I've got no complaints.
>
> terry
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Geordie Smith
> Sent: Tuesday, 1 August 2000 9:16 AM
> To: [EMAIL PROTECTED]
> Subject: RE: Tailshaft Spline Questions!
>
>
> Yes, they were cut, ripped, chomped, stuffed... Total butchery....
> I guess they figured that some hoon would buy the engine, so they didn't
> take too much attention to the accessories...
> SSS were assholes when I called them... And the last time I called them,
and
> the time before.... Maybe they are sick of having their brains picked for
> info... Maybe there's nothing to pick at??? I dunno...
>
> Perhaps I need to talk to somebody who sells intercoolers & pipes and
knows
> what they're on about...
>
>
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Terry &
> Heather
> Sent: Monday, 31 July 2000 9:32 PM
> To: [EMAIL PROTECTED]
> Subject: RE: Tailshaft Spline Questions!
>
>
> Geordie,
>
> If there is an SR model that's not intercooled you would pick up the
genuine
> bits from importers. SSS Automotive has heaps of bits in shelves and boxes
> so they should have something to fit. I take it the pipes off your engine
> were damaged.
>
> terry
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Geordie Smith
> Sent: Monday, 31 July 2000 1:48 PM
> To: [EMAIL PROTECTED]
> Subject: RE: Tailshaft Spline Questions!
>
>
> In a very nut shell... The SR has a cross-flow head.. Inlet on Driver's
> side, turbo on the other side... Turbo needs to be plumbd across the front
> of the motor with a 3-4 inch diameter rubber hose shaped kinda like this..
>
>
> [ ] [ ]
> [ ]__________[ ]
> \_______________/
>
>
> Nissan said "Re-mortgage your house and I think we'll be able to get
> something in from Japan!!!"
>
>
>
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of
> [EMAIL PROTECTED]
> Sent: Monday, 1 January 1601 11:00 AM
> To: [EMAIL PROTECTED]
> Subject: RE: Tailshaft Spline Questions!
>
>
> You will have a good chance of getting the genuine parts from most Nissan
> importers. You can get also get them made up at turbo exhaust places but i
> would think this to be the expensive way although if you are plumbing an
> intercooler you could be best in the long run going the fabricated way.
>
> If you ask the list for good local places and let us know where you are
i'm
> sure you'll get some good advice on either method.
>
> I'm not familiar with the querks of the SR so i'm just about done for
> specific
> ideas.
>
> regards
>
> Terry
>
> > I agree with your last comment. The Uni joint on the SR spline looks to
be
> > pressed together. Maybe I should pay someone to put the spline onto the
> old
> > tailshaft if the first or second fix doesn't work...
> >
> > I think that for method number 2, that the spline pushes it'self into
the
> > gearbox anyway, however far it needs to go within reason.. So that would
> > probably be a last resort..
> >
> > Another question.. I need to replace/aquire the plumbing that goes
between
> > the turbo and the throttle. That's the bit that goes across the front of
> the
> > motor. Is it wise to go to Nissan Australia for this or get it made to
> suit,
> > or is there something I can buy from somebody you know?
> >
> > I also need the rubber hose that goes from the air filter to the inlet
on
> > the turbo... Can you help me with this?
> >
> > I rang Nissan, and apparently silvia parts are SPECIAL order type of
> > arrangement in Australia, so the dude said to go and have a look at his
> > catalog and try to pick the parts I need. He said it may cost a few
> hundred
> > bucks.. I know these things are expensive hoses, but to pay hundreds for
2
> > or 3 hoses is a bit dumb if I can get them made or whatever... Any clues
> on
> > that one?
> >
> > Cheers.
> >
> >
> >
> >
>
>
> ----------------------------------------------------------------
> This message was sent using Dynamite Internet's Web Mail System.
> http://home.dynamite.com.au/
>
>
>
>
>
>
>
>
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
