been there done that.
Stanza struts fit but you need to drill out the holes on the strut top a
little as the bolts a slightly larger...(think this is right but it may have
been when i was using 1600 tops)
You need stanza lower arms, ball joints and steering arms. A 120y sway bar
is also good as there thicker..
should then bolt in however. I did this swap onto my 1200 ute and found the
stanza struts to be very tall....Taller than 1600's ones for that matter..
I cut the spring down to they say at normal 1200 height but that left me
with 2" of travel as the shock bottomed out.
I would recommend getting shorter inserts...say from a 280zx or 240k and
shortening the whole strut assembly if you want to get a reasonably low ride
height..
I also offset the tops it get more negitive camber....
Give me a yell if you need more info...
Chris P
-----Original Message-----
From: Davidson <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Date: Tuesday, 15 August 2000 19:45
Subject: Stanza Stuts in 1200....
>I have some old Stanza struts and was hoping to fit them to my 1200. How
do
>i know if there the later model struts?? (1980+). I know i need the stanza
>lower control arms and the castor rods. Is that all or am i missing
>somthing?? All the steering arms connect straight up right?? And the sway
>bar connects straight up aswell??
>
>Im trying to get everything ready first before i start pulling the struts
>out. I dont want to be half way thru it only to find i need some bits and
>peices. Any help is great :-)
>
>Scott
>Davo
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
