200b struts are very similar to stanza apart from the spring size. The only
difference in brakes is the disc size (1" bigger). You can actually swap
the hub/disc and caliper from the 200b on to the stanza strut for that
little bit extra...
Chris P
-----Original Message-----
From: Davidson <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Date: Wednesday, 16 August 2000 18:59
Subject: Re: Stanza Stuts in 1200....
>Thanks Chris,
>
>I have good idea at what i am going to do now. And still have my options
>open with the 200b struts. For now i will get the staza struts in and see
>what its like.
>
>Scott
>Davo
>
>-----Original Message-----
>From: cp <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
>Date: Tuesday, 15 August, 2000 20:20
>Subject: Re: Stanza Stuts in 1200....
>
>
>>been there done that.
>>
>>Stanza struts fit but you need to drill out the holes on the strut top a
>>little as the bolts a slightly larger...(think this is right but it may
>have
>>been when i was using 1600 tops)
>>
>>You need stanza lower arms, ball joints and steering arms. A 120y sway bar
>>is also good as there thicker..
>>
>>
>>should then bolt in however. I did this swap onto my 1200 ute and found
>the
>>stanza struts to be very tall....Taller than 1600's ones for that matter..
>>I cut the spring down to they say at normal 1200 height but that left me
>>with 2" of travel as the shock bottomed out.
>>
>>I would recommend getting shorter inserts...say from a 280zx or 240k and
>>shortening the whole strut assembly if you want to get a reasonably low
>ride
>>height..
>>
>>I also offset the tops it get more negitive camber....
>>
>>Give me a yell if you need more info...
>>
>>Chris P
>>
>>
>>
>>
>>-----Original Message-----
>>From: Davidson <[EMAIL PROTECTED]>
>>To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
>>Date: Tuesday, 15 August 2000 19:45
>>Subject: Stanza Stuts in 1200....
>>
>>
>>>I have some old Stanza struts and was hoping to fit them to my 1200. How
>>do
>>>i know if there the later model struts?? (1980+). I know i need the
>stanza
>>>lower control arms and the castor rods. Is that all or am i missing
>>>somthing?? All the steering arms connect straight up right?? And the
sway
>>>bar connects straight up aswell??
>>>
>>>Im trying to get everything ready first before i start pulling the struts
>>>out. I dont want to be half way thru it only to find i need some bits and
>>>peices. Any help is great :-)
>>>
>>>Scott
>>>Davo
>>>
>>
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
