Davo,
Have a look at the DBA catalogue if you haven't already as there are a few
Hilux models that do appear to be suitable ie LN61 and YN63 which are early
ventilated disc models with a weird hub height ala very large ~60mm+. Toyota
then reverted back to a smaller hub (49mm) for the RN 105, LN 106, YN 106
etc which at an educated guess is going to be a good ventilated type
calliper. If your going to solid 200B discs the RN45 is the calliper your
after from what I've learnt about this conversion. The Series 1 Stanza hubs
are very small ~33mm which also I'd be surprised if they're suitable for
this conversion. If you use Stanza hubs you'll need the hubs from the Series
2 (square headlights) which are the same as some 200B hubs (43.6mm). If
you're not sure what the measurements mean connect to http:/dba.com.au as
it's all explained there.
Oh and to answer you're question re the bolt spacing on the Toy callipers:
3.5" or 88.9mm so you're in business with the correct combo of bits. Let us
know if you use a vented disc with this as I'm sure it will be of interest
for the 200B strut 510 crowd (:-
regards
Terry
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Davidson
Sent: Tuesday, 22 August 2000 7:08 PM
To: [EMAIL PROTECTED]
Subject: springs, shocks n calipers
Are these decent prices?
$284 - front shockies for stanza struts. KYB's.
$98 each - lowered springs for stanza struts.
Also. What is the bolt spacing distance for the hilux calipers. If its
3.5" im in business. I need to know for sure before i put the other stuff
on. Thanx
Scott
Davo
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
