Hi Ben,
You wrote:
>there should be a start signal that goes into
>the computer via a )gy) wire. this wire when
Is that a "green yellow"? Based on a friend's
printed ECU spec, I traced that "gy" to be
going to pin 32. Thats for speed sensor. Is
that the one?? It is listed as "yellow green".
>power is supplied to it enriches the mix for
>cranking and cold start, you may not have it
>connected. this is the case for the rb series
>engines and many nissans are identical (eg the
>z32 vg30 uses the same comp as the rb)we had
>the same prob till we did this and it was the
>prob
Ok, I will try to check if this one is connected.
Thanks Ben.
Later,
Christie...
____________________________________________________________________
Get free email and a permanent address at http://www.netaddress.com/?N=1
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
