Terry
That radiator no longer lives.. We crash tested it and it failed.. hehe
We just got 2 bits of tube of the right diameters and welded them together..
Pretty rough but cheap...
I am running a huge 3 core in the new car and it certainly does the job, but
it is so heavy and being 3 core it holds millions of litres of water too. I
plan to change it sometime down the track as I can't stand the idea of
having so much extra un-needed weight.. A famous yacht designer, Uffa Fox,
once said that "weight is only good in steamrollers"
cheers
Mick
----- Original Message -----
From: Terry Rudd <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, September 17, 2000 11:25 PM
Subject: RE: radiator advice needed
> Mick,
>
> There are two types, one has the smaller pipes but the other one with the
> standard size outlets only comes with the inlet on the drivers side - I
take
> it you have the one with the inlet on the passenger side. What do use for
> the adaptor on these - something made up or purchased from a radiator
joint.
>
> terry
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Mick Ralph
> Sent: Sunday, 17 September 2000 7:44 PM
> To: [EMAIL PROTECTED]
> Subject: Re: radiator advive needed
>
>
> they are a great radiator and fit fairly easily except that the outlets on
> the radiator are smaller than the outlets on the motor which means u have
to
> make up some adaptors..All the previous advice is spot on (Trev and
> Terry)..I must say that i was concerned when we installed mine because it
> doesn't look all that 'efficient' compared with a 3 core.. however in many
> many k's of driving it never even looked like overheating - even towing
the
> boat!! (from Qld to melb and back again). The added advantage is the
weight
> saving - not only do they weigh much less than a std radiator but u also
get
> a weight saving on the amount of water they hold.. Can't go wrong I
reckon.
> cheers
> Mick
> ----- Original Message -----
> From: Thomas Grant <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Thursday, September 14, 2000 2:25 PM
> Subject: radiator advive needed
>
>
> > Anyone on the list put a radiator from an N13 pulsar in a datsun 1600?
I
> > need to know if this radiator will fit in my 1600 before I go out and
pick
> > one up from a wrecker. Are they about the right size, do they fit
easily?
> > Thomas.
> >
_________________________________________________________________________
> > Get Your Private, Free E-mail from MSN Hotmail at
http://www.hotmail.com.
> >
> > Share information about yourself, create your own public profile at
> > http://profiles.msn.com.
> >
> >
>
>
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
