Errol Smith wrote:
>
> Simon,
> You will need to grind/file a bit of the spacer where it contacts the disc
> area to give 3-4 mm clearance! Ensure that the stabiliser link has been
> fully undone and then push the lower control arm down till the spacer fits
> over the steering arm flange/ball joint thread. Then jack the arm under the
> end close to the ball joint until the arm angle is less severe to fit the
> bolts. Check the threads on the bolts are not damaged and they should go in
> reasonably easily. Do up the stabiliser bar link and all should be well.
> I will check my mail every 15 -20 mins for any further developments to help
> you out! Naturally Datrats spacers would have fitted perfectly straight
> away (Just joking!).
> Cheers
> Feral Errol
DONT FORGET THE LOCK TIGHT!!!!!!!!!!!!!! I'VE HEARD OF BOLTS COMING
UNDONE USING THOSE THINGS
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
