James,
L13, 14, 16 & 18 are 54.942mm same as L24 and L26
Cheers
Feral Errol
----------
From: jamesf <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Subject: Re: time to build L20 turbo
Date: Thursday, October 12, 2000 2:21
I noticed you didn't mention the L18/L16 rods here....What size is the
crank journal from those?
JamesF
Errol Smith wrote:
> Andrew,
> All the following rods use a 59.942mm crank journal.
> L20B 145.9mm, LZ20 152.45, LZ22 145.9, LZ24
> 143.9
> As you can see the only rod with some potential for lowering comp is the
> LZ24, even then only 2 mm.
> I personally would have gone for lower compression height pistons, (30 or
> 32mm compression height vs the normal 37.1mm).
--
________________________________________________________________________
James Fitness
Director
Data Scribe Australia Pty Ltd
http://www.datascribe.com.au
Computers and Supplies
OZDAT Online
http://www.datascribe.com.au/ozdatonline/index.htm
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
