Scott,
It depends, if you already have the electronic dizzy fitted then you probably
already have a 12 volt coil with no resistor so it should wire straight up if
not just bypass the resistor.
Andrew Smith
Davidson wrote:
> Cheers Andrew. Everyone i have spoken to has said the same thing. The
> bosch units will be able to perform just as well. Is there any re-wiring
> needed to fit these into a 1200 loom or is just a bolt on connect up job??
>
> Scott
>
> -----Original Message-----
> From: andrew smith <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
> Date: Friday, 20 October, 2000 22:08
> Subject: Re: coils for A14
>
> >Check with bosch as they have T-coils to suit most electronic ignition and
> >there pretty cheap( under $50 ). They usually out perform most aftermarket
> type
> >coils in tests. I've used them for years without any problems.I know a guy
> who
> >uses one on a FJ20 that puts out 344 HP at the back wheels and revs to 9000
> >rpm.
> >Andrew Smith
> >
> >Davidson wrote:
> >
> >> OK....time to buy a coil for the A14 race engine - electronic ignition.
> >>
> >> Whats peoples thoughts on Arlec supercoils??? Are they up to the job?
> Any
> >> other coils that people have used and recomend?? Bosch have anything to
> >> suit??
> >>
> >> Cheers
> >>
> >> Scott
> >> Davo
> >>
> >
> >
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
