There was only 1 type of bosch coil for electronic ignition that repco had.
He did show me 2 others for a points dizzy tho. The dizzy is a modified
pulsar unit. Andrew Denniss can confirm this as its his old engine. Andrew
ran a Echlin coil but i cant seem to find them. Repco dont stock them but
i'll try rare spares or autoone. I'll see what happens.
Scott
-----Original Message-----
From: andrew smith <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Date: Wednesday, 25 October, 2000 13:23
Subject: Re: coils for A14
>Scott,
>Bosch make quite a few coils to suit different electronic dizzies, check
with
>bosch on 1300307040 i think thats there tech number. What dizzy is it?
>Andrew Smith
>
>Davidson wrote:
>
>> OK. Im in trouble again. Went to go buy a Bosch t-coil BUT when reading
>> the back its says in big letters - do not use with a modified electronic
>> dizzy!! I have a modified dizzy so what do i do?? I was going to buy it
>> anyhow and see what happens but i decided not to. So is this a problem
or
>> should i just go buy it and wire it up and hope it works. help!
>>
>> Scott
>>
>> -----Original Message-----
>> From: Davidson <[EMAIL PROTECTED]>
>> To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
>> Date: Monday, 23 October, 2000 18:50
>> Subject: Re: coils for A14
>>
>> >Nah, my 1200 hasnt had electronic ignition before but sounds like an
easy
>> >wire up. Cheers again.
>> >
>> >Scott
>> >
>> >-----Original Message-----
>> >From: andrew smith <[EMAIL PROTECTED]>
>> >To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
>> >Date: Sunday, 22 October, 2000 22:35
>> >Subject: Re: coils for A14
>> >
>> >
>> >>Scott,
>> >>It depends, if you already have the electronic dizzy fitted then you
>> >probably
>> >>already have a 12 volt coil with no resistor so it should wire straight
up
>> >if
>> >>not just bypass the resistor.
>> >>Andrew Smith
>> >>Davidson wrote:
>> >>
>> >>> Cheers Andrew. Everyone i have spoken to has said the same thing.
The
>> >>> bosch units will be able to perform just as well. Is there any
>> re-wiring
>> >>> needed to fit these into a 1200 loom or is just a bolt on connect up
>> >job??
>> >>>
>> >>> Scott
>> >>>
>> >>> -----Original Message-----
>> >>> From: andrew smith <[EMAIL PROTECTED]>
>> >>> To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
>> >>> Date: Friday, 20 October, 2000 22:08
>> >>> Subject: Re: coils for A14
>> >>>
>> >>> >Check with bosch as they have T-coils to suit most electronic
ignition
>> >and
>> >>> >there pretty cheap( under $50 ). They usually out perform most
>> >aftermarket
>> >>> type
>> >>> >coils in tests. I've used them for years without any problems.I know
a
>> >guy
>> >>> who
>> >>> >uses one on a FJ20 that puts out 344 HP at the back wheels and revs
to
>> >9000
>> >>> >rpm.
>> >>> >Andrew Smith
>> >>> >
>> >>> >Davidson wrote:
>> >>> >
>> >>> >> OK....time to buy a coil for the A14 race engine - electronic
>> >ignition.
>> >>> >>
>> >>> >> Whats peoples thoughts on Arlec supercoils??? Are they up to the
>> job?
>> >>> Any
>> >>> >> other coils that people have used and recomend?? Bosch have
anything
>> >to
>> >>> >> suit??
>> >>> >>
>> >>> >> Cheers
>> >>> >>
>> >>> >> Scott
>> >>> >> Davo
>> >>> >>
>> >>> >
>> >>> >
>> >>>
>> >>
>> >>
>> >
>> >
>>
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
