OK. Im in trouble again. Went to go buy a Bosch t-coil BUT when reading
the back its says in big letters - do not use with a modified electronic
dizzy!! I have a modified dizzy so what do i do?? I was going to buy it
anyhow and see what happens but i decided not to. So is this a problem or
should i just go buy it and wire it up and hope it works. help!
Scott
-----Original Message-----
From: Davidson <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Date: Monday, 23 October, 2000 18:50
Subject: Re: coils for A14
>Nah, my 1200 hasnt had electronic ignition before but sounds like an easy
>wire up. Cheers again.
>
>Scott
>
>-----Original Message-----
>From: andrew smith <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
>Date: Sunday, 22 October, 2000 22:35
>Subject: Re: coils for A14
>
>
>>Scott,
>>It depends, if you already have the electronic dizzy fitted then you
>probably
>>already have a 12 volt coil with no resistor so it should wire straight up
>if
>>not just bypass the resistor.
>>Andrew Smith
>>Davidson wrote:
>>
>>> Cheers Andrew. Everyone i have spoken to has said the same thing. The
>>> bosch units will be able to perform just as well. Is there any
re-wiring
>>> needed to fit these into a 1200 loom or is just a bolt on connect up
>job??
>>>
>>> Scott
>>>
>>> -----Original Message-----
>>> From: andrew smith <[EMAIL PROTECTED]>
>>> To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
>>> Date: Friday, 20 October, 2000 22:08
>>> Subject: Re: coils for A14
>>>
>>> >Check with bosch as they have T-coils to suit most electronic ignition
>and
>>> >there pretty cheap( under $50 ). They usually out perform most
>aftermarket
>>> type
>>> >coils in tests. I've used them for years without any problems.I know a
>guy
>>> who
>>> >uses one on a FJ20 that puts out 344 HP at the back wheels and revs to
>9000
>>> >rpm.
>>> >Andrew Smith
>>> >
>>> >Davidson wrote:
>>> >
>>> >> OK....time to buy a coil for the A14 race engine - electronic
>ignition.
>>> >>
>>> >> Whats peoples thoughts on Arlec supercoils??? Are they up to the
job?
>>> Any
>>> >> other coils that people have used and recomend?? Bosch have anything
>to
>>> >> suit??
>>> >>
>>> >> Cheers
>>> >>
>>> >> Scott
>>> >> Davo
>>> >>
>>> >
>>> >
>>>
>>
>>
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
