as far as i can tell the d5 has a rev limiter and is a little smaller, i
spose they can suit any ign as the are fuel only computers and dont go near
the ign. there are inputs from water and air(mani) temp. im not sure on max
boost youde have to ask microtech, but 20+ ide say
-----Original Message-----
From: andrew smith <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Date: Tuesday, 14 November 2000 20:23
Subject: Re: NEEDED Z-18et COMPUTER AND WIRING HARNESS
>Andrew,
>Whats the diff between the D4 and D5? Can they be configued to suit any
>ignition? Do they use inlet manifold temp sensors?What max boost will map
sensor
>handle? I'm intersted in buying one and any info would be great.
>Andrew Smith
>
>Andrew Peters wrote:
>
>> i decided i can let my d4 go for $250 with loom or i can get a d5 for
$300
>> with loom, if you can get say $50 back on stocker loom and comp like
steve,
>> its a decent upgrade, much cheaper than the $1k+ for new comps
>> andrew
>> -----Original Message-----
>> From: Daniel Kroehn <[EMAIL PROTECTED]>
>> To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
>> Date: Monday, 13 November 2000 22:31
>> Subject: Re: NEEDED Z-18et COMPUTER AND WIRING HARNESS
>>
>> >Thanks steve. I think I'll pick one up from Errol as soon as he gets
some
>> >in as he had a good price on his batch of Z-18ets and they came with
>> >everthing to "drop it in an drive away" . I will upgrade the computer
in
>> >the future but at the moment I only have enough funds to buy the thing
and
>> >drop it in the car. But hey, with a few simple breathing mods it should
>> >surely produce more power than my twin webered, over cammed L20B. And
>> >besides I still have to put my R31 and hilux/200B brakes on the car, so
>> that
>> >takes a little out of the budget.
>> >
>> >Thanks
>> >
>> >Daniel Kroehn
>> >
>> >Supporting Datrats
>> >WWW.Datrats.com.au
>> >
>> >----- Original Message -----
>> >From: Steve Taylor <[EMAIL PROTECTED]>
>> >To: <[EMAIL PROTECTED]>
>> >Sent: Tuesday, November 14, 2000 7:47 AM
>> >Subject: Re: NEEDED Z-18et COMPUTER AND WIRING HARNESS
>> >
>> >
>> >> Daniel,
>> >> I just sold my Z18et factory computer/loom/and airflow meter to SSS
for
>> >> $50!!!!!!!!!! So unless you cant find a g/box to suit for under $950
this
>> >is
>> >> certainly far to expensive. Apart from that the computer is the first
>> >thing
>> >> that i got rid of and probably the most successful power enhancement
ive
>> >done.
>> >> Performance will be extremely limited if trying to use the standard
comp
>> >and
>> >> basically it is just not worth the effort - they suck to wire aswell
(the
>> >> microtech took about 1 hour to install).
>> >> So if i were you id save the dollars, get a good aftermarket comp. (im
>> >just
>> >> using a digi fuel only microtech) and youll be more than pleased with
how
>> >> she'll go!
>> >> Cheers
>> >> Steve.
>> >>
>> >> Daniel Kroehn wrote:
>> >>
>> >> > Most of the jap import wreckers sell them for under $1000 without
>> >> > computer/harness and g/box. SSS in sydney has a complete package
>> >(g/box,
>> >> > engine, turbo, manifolds, comp, harness etc) only done 60 000 kays
and
>> >the
>> >> > guy drove it in Japan and reckons its a sweet motor. $2000 firm.
I'm
>> >> > waiting to see if Errol can get some more in 'cause he had a good
price
>> >on
>> >> > the last batch he had.
>> >> >
>> >> > Hope it helps.
>> >> >
>> >> > Daniel Kroehn
>> >> >
>> >> > ----- Original Message -----
>> >> > From: Wayne Jones <[EMAIL PROTECTED]>
>> >> > To: <[EMAIL PROTECTED]>
>> >> > Sent: Monday, November 13, 2000 4:56 PM
>> >> > Subject: Re: NEEDED Z-18et COMPUTER AND WIRING HARNESS
>> >> >
>> >> > > hi,
>> >> > > if you decide not to get it could you let me know of the seller.
>> >> > >
>> >> > > reg
>> >> > > wayne jones
>> >> > > http://drive.to/maximum_boost
>> >> > >
>> >> > >
>> >> > > >From: "Daniel Kroehn" <[EMAIL PROTECTED]>
>> >> > > >Reply-To: [EMAIL PROTECTED]
>> >> > > >To: <[EMAIL PROTECTED]>
>> >> > > >Subject: NEEDED Z-18et COMPUTER AND WIRING HARNESS
>> >> > > >Date: Mon, 13 Nov 2000 13:20:31 +1000
>> >> > > >
>> >> > > >List,
>> >> > > >
>> >> > > >I've found a Z-18et for a really good price without the box or
the
>> >> > computer
>> >> > > >and harness. Everything else is there. I already have a few L
>> >series
>> >> > > >boxes at home so I don't need a gearbox but I do need a HARNESS
and
>> >> > > >COMPUTER. If any of you guys who have put aftermarket computer
on
>> >your
>> >> > > >zeds have one lying around and are willing to sell it, could you
>> >write
>> >> > > >back.
>> >> > > >
>> >> > > >I JUST DON'T WANT TO LET THIS ONE SLIP THROUGH MY FINGERS, BUT
I'LL
>> >HAVE
>> >> > TO
>> >> > > >IF I CAN'T GET A COMPUTER AND HARNESS
>> >> > > >
>> >> > > >Thanks
>> >> > > >
>> >> > > >
>> >> > > >Daniel Kroehn
>> >> > > >
>> >> > >
>> >> > >
>>
>_________________________________________________________________________
>> >> > > Get Your Private, Free E-mail from MSN Hotmail at
>> >http://www.hotmail.com.
>> >> > >
>> >> > > Share information about yourself, create your own public profile
at
>> >> > > http://profiles.msn.com.
>> >> > >
>> >> > >
>> >> >
>> >>
>> >>
>> >
>> >
>>
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
