not sure on the resistance but cant see why not, im in sydney but both comps
have been snapped up.
-----Original Message-----
From: andrew smith <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Date: Wednesday, 15 November 2000 15:24
Subject: Re: NEEDED Z-18et COMPUTER AND WIRING HARNESS
>Andrew
>I realised about 20 secs after pressing the send button i asked about
ignition
>imputs even though i knew it was fuel only. Can you tell me if it'll run
any
>impedance injectors? Where do you live?
>Andrew Smith
>
>Andrew Peters wrote:
>
>> as far as i can tell the d5 has a rev limiter and is a little smaller, i
>> spose they can suit any ign as the are fuel only computers and dont go
near
>> the ign. there are inputs from water and air(mani) temp. im not sure on
max
>> boost youde have to ask microtech, but 20+ ide say
>> -----Original Message-----
>> From: andrew smith <[EMAIL PROTECTED]>
>> To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
>> Date: Tuesday, 14 November 2000 20:23
>> Subject: Re: NEEDED Z-18et COMPUTER AND WIRING HARNESS
>>
>> >Andrew,
>> >Whats the diff between the D4 and D5? Can they be configued to suit any
>> >ignition? Do they use inlet manifold temp sensors?What max boost will
map
>> sensor
>> >handle? I'm intersted in buying one and any info would be great.
>> >Andrew Smith
>> >
>> >Andrew Peters wrote:
>> >
>> >> i decided i can let my d4 go for $250 with loom or i can get a d5 for
>> $300
>> >> with loom, if you can get say $50 back on stocker loom and comp like
>> steve,
>> >> its a decent upgrade, much cheaper than the $1k+ for new comps
>> >> andrew
>> >> -----Original Message-----
>> >> From: Daniel Kroehn <[EMAIL PROTECTED]>
>> >> To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
>> >> Date: Monday, 13 November 2000 22:31
>> >> Subject: Re: NEEDED Z-18et COMPUTER AND WIRING HARNESS
>> >>
>> >> >Thanks steve. I think I'll pick one up from Errol as soon as he gets
>> some
>> >> >in as he had a good price on his batch of Z-18ets and they came with
>> >> >everthing to "drop it in an drive away" . I will upgrade the
computer
>> in
>> >> >the future but at the moment I only have enough funds to buy the
thing
>> and
>> >> >drop it in the car. But hey, with a few simple breathing mods it
should
>> >> >surely produce more power than my twin webered, over cammed L20B.
And
>> >> >besides I still have to put my R31 and hilux/200B brakes on the car,
so
>> >> that
>> >> >takes a little out of the budget.
>> >> >
>> >> >Thanks
>> >> >
>> >> >Daniel Kroehn
>> >> >
>> >> >Supporting Datrats
>> >> >WWW.Datrats.com.au
>> >> >
>> >> >----- Original Message -----
>> >> >From: Steve Taylor <[EMAIL PROTECTED]>
>> >> >To: <[EMAIL PROTECTED]>
>> >> >Sent: Tuesday, November 14, 2000 7:47 AM
>> >> >Subject: Re: NEEDED Z-18et COMPUTER AND WIRING HARNESS
>> >> >
>> >> >
>> >> >> Daniel,
>> >> >> I just sold my Z18et factory computer/loom/and airflow meter to SSS
>> for
>> >> >> $50!!!!!!!!!! So unless you cant find a g/box to suit for under
$950
>> this
>> >> >is
>> >> >> certainly far to expensive. Apart from that the computer is the
first
>> >> >thing
>> >> >> that i got rid of and probably the most successful power
enhancement
>> ive
>> >> >done.
>> >> >> Performance will be extremely limited if trying to use the standard
>> comp
>> >> >and
>> >> >> basically it is just not worth the effort - they suck to wire
aswell
>> (the
>> >> >> microtech took about 1 hour to install).
>> >> >> So if i were you id save the dollars, get a good aftermarket comp.
(im
>> >> >just
>> >> >> using a digi fuel only microtech) and youll be more than pleased
with
>> how
>> >> >> she'll go!
>> >> >> Cheers
>> >> >> Steve.
>> >> >>
>> >> >> Daniel Kroehn wrote:
>> >> >>
>> >> >> > Most of the jap import wreckers sell them for under $1000 without
>> >> >> > computer/harness and g/box. SSS in sydney has a complete package
>> >> >(g/box,
>> >> >> > engine, turbo, manifolds, comp, harness etc) only done 60 000
kays
>> and
>> >> >the
>> >> >> > guy drove it in Japan and reckons its a sweet motor. $2000 firm.
>> I'm
>> >> >> > waiting to see if Errol can get some more in 'cause he had a good
>> price
>> >> >on
>> >> >> > the last batch he had.
>> >> >> >
>> >> >> > Hope it helps.
>> >> >> >
>> >> >> > Daniel Kroehn
>> >> >> >
>> >> >> > ----- Original Message -----
>> >> >> > From: Wayne Jones <[EMAIL PROTECTED]>
>> >> >> > To: <[EMAIL PROTECTED]>
>> >> >> > Sent: Monday, November 13, 2000 4:56 PM
>> >> >> > Subject: Re: NEEDED Z-18et COMPUTER AND WIRING HARNESS
>> >> >> >
>> >> >> > > hi,
>> >> >> > > if you decide not to get it could you let me know of the
seller.
>> >> >> > >
>> >> >> > > reg
>> >> >> > > wayne jones
>> >> >> > > http://drive.to/maximum_boost
>> >> >> > >
>> >> >> > >
>> >> >> > > >From: "Daniel Kroehn" <[EMAIL PROTECTED]>
>> >> >> > > >Reply-To: [EMAIL PROTECTED]
>> >> >> > > >To: <[EMAIL PROTECTED]>
>> >> >> > > >Subject: NEEDED Z-18et COMPUTER AND WIRING HARNESS
>> >> >> > > >Date: Mon, 13 Nov 2000 13:20:31 +1000
>> >> >> > > >
>> >> >> > > >List,
>> >> >> > > >
>> >> >> > > >I've found a Z-18et for a really good price without the box or
>> the
>> >> >> > computer
>> >> >> > > >and harness. Everything else is there. I already have a few
L
>> >> >series
>> >> >> > > >boxes at home so I don't need a gearbox but I do need a
HARNESS
>> and
>> >> >> > > >COMPUTER. If any of you guys who have put aftermarket
computer
>> on
>> >> >your
>> >> >> > > >zeds have one lying around and are willing to sell it, could
you
>> >> >write
>> >> >> > > >back.
>> >> >> > > >
>> >> >> > > >I JUST DON'T WANT TO LET THIS ONE SLIP THROUGH MY FINGERS, BUT
>> I'LL
>> >> >HAVE
>> >> >> > TO
>> >> >> > > >IF I CAN'T GET A COMPUTER AND HARNESS
>> >> >> > > >
>> >> >> > > >Thanks
>> >> >> > > >
>> >> >> > > >
>> >> >> > > >Daniel Kroehn
>> >> >> > > >
>> >> >> > >
>> >> >> > >
>> >>
>>
>_________________________________________________________________________
>> >> >> > > Get Your Private, Free E-mail from MSN Hotmail at
>> >> >http://www.hotmail.com.
>> >> >> > >
>> >> >> > > Share information about yourself, create your own public
profile
>> at
>> >> >> > > http://profiles.msn.com.
>> >> >> > >
>> >> >> > >
>> >> >> >
>> >> >>
>> >> >>
>> >> >
>> >> >
>> >>
>> >
>> >
>>
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
