Mick,
Well it is a straight bolt up, but needs to be bolted in a slightly
different position. Nothing too difficult.
Cheers
Feral Errol
WWW.Datrats.com.au
----------
From: Mick Ralph <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Subject: Re: NEEDED Z-18et COMPUTER AND WIRING HARNESS
Date: Wednesday, November 15, 2000 23:26
Errol
I thought that the Z head would be almost a straight bolt up type of set
up.
You (I) learn something new every day..
thanks mate
cheers
Mick
----- Original Message -----
From: Errol Smith <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, November 15, 2000 5:03 PM
Subject: Re: NEEDED Z-18et COMPUTER AND WIRING HARNESS
> Mick,
> Thats a good idea, but you need to decompress your L series before
fitting
> the Z18ET head and manifolds. You should also change the angle of the
block
> as the oil returns need the block to be inclined to prevent oil build up
> over the valve stem seals
> Cheers
> Feral Errol
> WWW.Datrats.com.au
>
> ----------
> From: Mick Ralph <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Subject: Re: NEEDED Z-18et COMPUTER AND WIRING HARNESS
> Date: Wednesday, November 15, 2000 12:37
>
> Daniel
> U could just put a Z head onto an L series block.. then u could keep the
> same gearbox and even the same engine number..
> I think thats what i am going to do
> cheers
> mick
>
> ----- Original Message -----
> From: Daniel Kroehn
> To: [EMAIL PROTECTED]
> Sent: Monday, November 13, 2000 4:07 PM
> Subject: Re: NEEDED Z-18et COMPUTER AND WIRING HARNESS
>
>
> Thanks for that Zac, a few people had told me otherwise. I think I'll
> have to go for an aftermarket comp. or find a complete package, not
having
> much luck though.
>
> Daniel Kroehn
> ----- Original Message -----
> From: Zac Campbell
> To: [EMAIL PROTECTED]
> Sent: Monday, November 13, 2000 3:13 PM
> Subject: Re: NEEDED Z-18et COMPUTER AND WIRING HARNESS
>
>
> Sorry, but you do need a gearbox!
> The Z18 sits on an angle (8 degrees from memory) and thus the gear
> selector will point towards the passenger.
> I have seen a Z18 in a 1600 with an L-series box, but the owner had
> angled the engine instaed. it looked hideous. 1/2 the strut tower was
> sledge hammered to clear the inlet manifold!
>
> zac
>
> ----- Original Message -----
> From: Daniel Kroehn
> To: [EMAIL PROTECTED]
> Sent: Monday, November 13, 2000 1:50 PM
> Subject: NEEDED Z-18et COMPUTER AND WIRING HARNESS
>
>
> List,
>
> I've found a Z-18et for a really good price without the box or the
> computer and harness. Everything else is there. I already have a few L
> series boxes at home so I don't need a gearbox but I do need a HARNESS
and
> COMPUTER. If any of you guys who have put aftermarket computer on your
> zeds have one lying around and are willing to sell it, could you write
> back.
>
> I JUST DON'T WANT TO LET THIS ONE SLIP THROUGH MY FINGERS, BUT I'LL
> HAVE TO IF I CAN'T GET A COMPUTER AND HARNESS
>
> Thanks
>
>
> Daniel Kroehn
>
>
--membersozdat------------------------------------------------------
-
>
> OZDAT Mailing List Please Note:-
> Send (un)subscribe requests to [EMAIL PROTECTED]
> Send submissions to [EMAIL PROTECTED]
> No unauthorised redistribution of this email
> http://www.ozdat.com/ozdatonline/index.htm
> http://www.ozdat.com/ozdatonline/listindex.html
> http://www.mail-archive.com/[email protected]/
>
--------------------------------------------------------------------
-
>
> --membersozdat-------------------------------------------------------
> OZDAT Mailing List Please Note:-
> Send (un)subscribe requests to [EMAIL PROTECTED]
> Send submissions to [EMAIL PROTECTED]
> No unauthorised redistribution of this email
> http://www.ozdat.com/ozdatonline/index.htm
> http://www.ozdat.com/ozdatonline/listindex.html
> http://www.mail-archive.com/[email protected]/
> ---------------------------------------------------------------------
>
> --membersozdat-------------------------------------------------------
> OZDAT Mailing List Please Note:-
> Send (un)subscribe requests to [EMAIL PROTECTED]
> Send submissions to [EMAIL PROTECTED]
> No unauthorised redistribution of this email
> http://www.ozdat.com/ozdatonline/index.htm
> http://www.ozdat.com/ozdatonline/listindex.html
> http://www.mail-archive.com/[email protected]/
> ---------------------------------------------------------------------
>
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
