Sorry I've got nothing on those pumps.
Andrew Smith
Errol Smith wrote:
> Andrew,
> I just pulled a Bosch 0 580464 005 from a 450 Benz. Could this be a
> substituted pump? If so do you have any specs on it and a 0 580 254 949 Audi
> 5e oump?
> Cheers
> Feral Errol
> mailto:[EMAIL PROTECTED]
> http://www.datrats.com.au/
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of andrew smith
> Sent: Friday, February 09, 2001 12:20 PM
> To: [EMAIL PROTECTED]
> Subject: Re: Fuel pumps.
>
> Errol,
> The pump I have listed for the V8 Merc is 254 975 which flows 2.7 L/min at
> 40psi(455hp).The 6Cyl Merc 254 942 flows 2.3 L/min at 40psi(390hp).VL Comm
> 464 033 or 464 008 flows 2.3 L/min at 40psi(390hp).Porsche 254 984 flows 3.1
> L/min at 40psi(520hp).Motorsport flows 3.6 L/min at 40psi(600hp).R31 skyline
> flows 2 L/min at 255kPa(335hp),dont know if this is oz skyline.The injectors
> from the 450 merc are good for Fj20's etc,these are the 280 150 036(blue)
> they flow 8.5 mil/sec at 48psi which should be good for at least 80hp
> each.Even the 034(green) from the 350 merc flow 7.5 mil/sec.Hope this helps.
> Andrew Smith
>
> Errol Smith wrote:
>
> > Rhys,
> > Benz 450 pump is 0 580 464 005 . The 254 series I have an idea are from
> > Audi?
> > Andrew Smith may know?
> > Cheers
> > Feral Errol
> > mailto:[EMAIL PROTECTED]
> > http://www.datrats.com.au/
> >
> > -----Original Message-----
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED]]On Behalf Of R.Hunter
> > Sent: Friday, February 25, 2000 1:33 PM
> > To: [EMAIL PROTECTED]
> > Subject: Fuel pumps.
> >
> > I have 2 bosch efi pumps that I hope someone can identify.
> > I know they are out of mercedes benz .
> > part numbers.. 0 580 254 973 (large fat pump - I'm sure is a 350se or
> > 450)
> > and smaller pump 0 580 254 950
> > CAN ANYONE HELP?
> > Also I have a dr30 rs (fj20e) pump. part no. JECS ...17010 F5950, A40-000
> > 772, 1925. (i'm sure this pump is not real dr30 FJ20e pump cause it has
> > wreckers pen writing on it saying HR30).
> > I plan to run 2 of the little facet high volume solid state pumps to the
> > surge tank and the one of the above efi pumps to the rail with 3/8th I.D
> > steel bundy and standard 1/4"line as return to surge tank. with separate
> > return form surge to fuel tank... Anyone see any probs with this setup?
> > Does anyone have any specs for those little solid state facets (look like
> > little power transformers)?
> > Thanks for the help with my continuing questions...
> > Rhys Hunter
> >
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
