I've been looking at factory replacement thermo switches at the local auto
parts store and there is lots of different on/off temperature options. Most
nissans were ~85deg, but some rotary and Holdens were 90-95deg. Almost all
of them came with the same thread too, making them interchangeable. The only
problem would be the wiring plug if you are using a factory loom
zac
----- Original Message -----
From: damien cm <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, April 11, 2001 2:25 PM
Subject: KEEPING IT COOL
>
> All,
>
>
> I have recently purchased a second hand thermo fan, and I have a
question:-
>
> I once installed a thermo fan on my Escort. I used a Davies Craig
adjustable
> thermatic switch, which was quiet expensive. Surely cars that come
standard
> with thermo-fan(i.e-all FWD's) would have a similar thermatic switch.
Would
> it be possible to use one from a FWD and make it adjustable using a
variable
> resistor??. I assume that this would be cheaper than buying the Davies
Craig
> unit($50-60 at my local auto stores)
>
> Forever trying to save $$$$$$,
>
> Damien
> _________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
