I'm pretty sure MadDat does them! zac > Jordan, > > First of all, I like the abbreviation 'VLSD', never heard of it, I'll have > to start using it!!!!!! > > > I recently put a 4.4 R200 VLSD into my 16. I brought the diff of a guy who > had written his 16 of. Because the diff was already in a 16, all the hard > work i.e- the 4-stud output flanges were already on,and the rear diff > crossmember was already made. > > The diff was out of a R31 import. They go for about $600 dollars. The > biggest drama is modifing the output shaft so that you can bolt the 1600 > half-shafts on. > > I had to get a tailshaft made up, because the input flange on the R200 is > bigger(naturally!!) than the 1600 flange. > > As for the rear diff cross member, Someone may make them e.g feral Errol or > 1600 workshop in VIC, or SSS in sydney. Shop around. > > All up it cost me > > *$350 for R200 > *$40 for oil(ouch) Castrol SAF XA > *$88 for tailshaft mods > *$20 for paint, new tailshaft bolts, ETC,ETC. > > When you stand behind my car, the diff is relly obvious, and looks as phat > as!! > > Good luck > > Damien
