Daniel,
The VL turbo pistons are 86mm stock so this is a 1mm overbore for the Z18.
The comp height is about right though with a bit of the top I am told.
Cheers
Feral Errol
mailto:[EMAIL PROTECTED]
http://www.datrats.com.au/
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of James Cox
Sent: Monday, June 04, 2001 6:28 AM
To: [EMAIL PROTECTED]
Subject: Re: A question of pistons
Well not surprising, the VL Turbo is a NISSAN motor :)
>
>List,
>
>within the next month I am looking at rebuilding the short motor for my
>Z-18et project. Someone a while ago mentioned that VL turbo pistons have
>the same/close to pin height and same bore diameter as stock Z-18et ones,
>can anyone confirm this? I see these as a good piston to use for a street
>car without having to go to the expense of forgies as there is a VL turbo
>running around with 357kW at the back wheels and stock internals! Its been
>pretty reliable as I understand it. Comments/suggestions would be greatly
>appreciated as this is a subject I'm a little hazy on.
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
