Yep, the light should be on cause you would have no oil pressure
before you crank, also the light should come on or flicker when the car is
really cold( very low revs below 800). If the light doesn't work check the
oil pressure sender unit on the block and then the wiring from the sender to
the dash, should be easily fixed!
Good Luck
Justin
> Can anyone tell me if the oil light is supposed to be one when you turn
> the
> ignition key to "on" before cranking, in a 1600. I seem to recall that
> when
> I was previously working on my car the oil light would come on before
> cranking and then go out after the car started. Any help or advice
> appreciated.
> Thanks
> Lachlan
> _________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
