AE92 (? not sure) Toyota Corolla, they are about 15mm short of not fitting
in between the chassis rails at all and the filler cap will be about 20-50mm
shy of the bonnet. The only problem you might have is that the plastic
tanks would make moving in/outlets rather expensive. The Corolla radiator
has the right positions for a Z motor, there's also a Camry item which will
suit an L series. If you use the Corolla item use a top hose from a KB
Laser and get a 90 degree bend made up, and use the stock 1600 hose on the
bottom. You'll probably also need size adaptors made up since the hoses are
different diameters on the Toyota.
Hope this helps!
- Tom
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of robert hall
Sent: Monday, 23 July 2001 3:31 PM
To: [EMAIL PROTECTED]
Subject: 1600 radiator
hi,
whats the biggest radiator i can put in my 1600?
i dont care about the position of the inlet and outlet, just the physical
size.
tried a bluebird radiator , but its too tall.
i dont really want to modify the front support panel, but if i have to i
will..
mark
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
