Jake, We visited this topic ages ago - I didn't keep the 200B sender fix in my tech files (damn). I didn't actually invent that one, it was Wardy the electronics guru. I'll get in touch with him and see if he can remember what we did. It wasn't exy or difficult and all available from Dick Smith from what I recall. it was something to do with the different voltages that the 1600 and 200B gauges run on.
regards Terry -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Turbo 510 Sent: Wednesday, 26 September 2001 9:54 AM To: [EMAIL PROTECTED] Subject: Re: Fuel tanks 200b tank will fit. You need to cut of the original tank mounts and build a support frame to mount it in. My filler is in the boot. Haven't had any hassles with that but I am about to take the corner out of the leading edge of the boot lid to fit a skyline type filler there. Fuel guage will read 1/2 when you have a full tank. I beleive Terry knows a fix for this but I can't remember it. 180b tank will fit with less mods but I am not sure on the increase in capacity. Jake ps Terry, if you could email me the gauge fix on [EMAIL PROTECTED] if you read this I would be grateful --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
