Terry, I should have mentioned that only 2 of the holes on my X member(sorry about that) do have the tack welded nut on them. So I have bolts in all of the nuts atm.
Sorry about the deceiving link, I named that site when I was planning on getting an Fj and ended up with an sr. the pic was mount.jpg and link was fj20t (yeah i know very confusing :) thanks alot for your help Terry, Adam ----- Original Message ----- From: "Terry Rudd" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, February 16, 2002 11:21 PM Subject: RE: HELP please > Adam, > > It just occurred to me that not all 1600 xmembers use all 4 bolts to attach > the engine mounts. Some of them only have 2 of the holes with the tack > welded nut (lower from memory but don't quote me) and the other 2 holes are > blanks. All 4 holes on the mount plate should still line up though. > > Something else, you said you were fitting a SR, yet those pics were both > called fj20t.jpg? > > regards > Terry > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On Behalf Of Terry Rudd > Sent: Saturday, 16 February 2002 11:01 PM > To: [EMAIL PROTECTED] > Subject: RE: HELP please > > > Adam, > > I can't spot what's wrong from the pics. There's definitely a problem if the > mounts don't line up with all 4 bolts. The brackets are different, i.e. left > and right - check you haven't be given 2 the same or something. Both of the > 1600 mounts are the same for either side, it only the brackets that are > different. > > regards > Terry > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On Behalf Of Adam Jackson > Sent: Saturday, 16 February 2002 10:05 PM > To: [EMAIL PROTECTED] > Subject: Re: HELP please > > > Hi Rick, > > The holes aren't lined up. > Well the bottom holes are lined up with the top holes of the engine mount. > But not bottom to bottom. if that makes any sense > > cheers, > Adam > > ----- Original Message ----- > From: "Rick White" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Saturday, February 16, 2002 9:48 PM > Subject: Re: HELP please > > > > Adam it looks lined up to me. > > Did you take the pic of the wrong side? > > > > > > --- "Adam Jackson" <[EMAIL PROTECTED]> wrote: > > >http://www.users.bigpond.net.au/fj20t/mount.jpg > > > > > >here's a link, i'll take more if this pic isn't all that helpful > > > > > >----- Original Message ----- > > >From: "Terry Rudd" <[EMAIL PROTECTED]> > > >To: <[EMAIL PROTECTED]> > > >Sent: Saturday, February 16, 2002 8:31 PM > > >Subject: RE: HELP please > > > > > > > > >> Adam, > > >> I don't know the details of a Maddat kit as i've never used one but > what > > >> engine mounts are you supposed to use with it? The SSS kit uses stock > 1600 > > >> mounts. > > >> > > >> regards > > >> Terry > > >> > > >> -----Original Message----- > > >> From: [EMAIL PROTECTED] > > >> [mailto:[EMAIL PROTECTED]]On Behalf Of Adam Jackson > > >> Sent: Saturday, 16 February 2002 8:19 PM > > >> To: [EMAIL PROTECTED] > > >> Subject: HELP please > > >> > > >> > > >> Hi everyone, > > >> > > >> I've just been 'trying' to drop my sr into my 1600. I'm having a little > > >> difficulty tho, it seems that the X member and engine mounts don't line > up > > >> on side. I have a maddat fitting kit and brand spanking new engine > mounts, > > >> so the X member is reversed etc... > > >> > > >> When I bolt up the passenger side, the driver side mount is atleast > 50mm > > >out > > >> of whack. If i were to put spacers in there then the holes would line > up A > > >> ok, so what am i missing? Should i have put spacers in before putting > the > > >> engine mounts on? I'm at a loss, all help very much appreciated. > > >> > > >> cheers, > > >> Adam > > >> > > >> > > > > > > > _____________________________________________________________ > > Get Your free Ozdat Email Account > > ---> http://www.ozdat.com > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
