Terry, Thanks alot for your help, i'll hold off and see what craig has to say. It isn't too important that I have the correct mount atm as i am doing a trial fit of everythign before painting.
cheers, Adam ----- Original Message ----- From: "Terry Rudd" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Sunday, February 17, 2002 12:20 AM Subject: RE: HELP please > Adam, > It's not something that I'd be willing to advise you on without seeing it. I > know what's engineered right by eyeball but even photos are deceiving. If > you're still concerned I'd try and get someone in your area to have a look - > it's amazing what a relatively inexperienced 2nd opinion can spot, it all > looks the bloody same after a while. > > It will be interesting to read what Craig has to say in it. > > regards > Terry > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On Behalf Of Adam Jackson > Sent: Saturday, 16 February 2002 11:10 PM > To: [EMAIL PROTECTED] > Subject: Re: HELP please > > > Terry, > > The brackets on the engine only fit on their respective sides on the sr. So > that can't be the problem, the engine seems to sit well with the top/bottom > and bottom/bottom setup. I'll take some more pics to show you. > > Would it cause any major dramas to leave it as is? I have emailed craig from > maddat to see what he suggests, but i'd like to sort it out while i have the > engine hoist. > > > cheers, > Adam > ----- Original Message ----- > From: "Terry Rudd" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Saturday, February 16, 2002 11:01 PM > Subject: RE: HELP please > > > > Adam, > > > > I can't spot what's wrong from the pics. There's definitely a problem if > the > > mounts don't line up with all 4 bolts. The brackets are different, i.e. > left > > and right - check you haven't be given 2 the same or something. Both of > the > > 1600 mounts are the same for either side, it only the brackets that are > > different. > > > > regards > > Terry > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED]]On Behalf Of Adam Jackson > > Sent: Saturday, 16 February 2002 10:05 PM > > To: [EMAIL PROTECTED] > > Subject: Re: HELP please > > > > > > Hi Rick, > > > > The holes aren't lined up. > > Well the bottom holes are lined up with the top holes of the engine mount. > > But not bottom to bottom. if that makes any sense > > > > cheers, > > Adam > > > > ----- Original Message ----- > > From: "Rick White" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Saturday, February 16, 2002 9:48 PM > > Subject: Re: HELP please > > > > > > > Adam it looks lined up to me. > > > Did you take the pic of the wrong side? > > > > > > > > > --- "Adam Jackson" <[EMAIL PROTECTED]> wrote: > > > >http://www.users.bigpond.net.au/fj20t/mount.jpg > > > > > > > >here's a link, i'll take more if this pic isn't all that helpful > > > > > > > >----- Original Message ----- > > > >From: "Terry Rudd" <[EMAIL PROTECTED]> > > > >To: <[EMAIL PROTECTED]> > > > >Sent: Saturday, February 16, 2002 8:31 PM > > > >Subject: RE: HELP please > > > > > > > > > > > >> Adam, > > > >> I don't know the details of a Maddat kit as i've never used one but > > what > > > >> engine mounts are you supposed to use with it? The SSS kit uses stock > > 1600 > > > >> mounts. > > > >> > > > >> regards > > > >> Terry > > > >> > > > >> -----Original Message----- > > > >> From: [EMAIL PROTECTED] > > > >> [mailto:[EMAIL PROTECTED]]On Behalf Of Adam > Jackson > > > >> Sent: Saturday, 16 February 2002 8:19 PM > > > >> To: [EMAIL PROTECTED] > > > >> Subject: HELP please > > > >> > > > >> > > > >> Hi everyone, > > > >> > > > >> I've just been 'trying' to drop my sr into my 1600. I'm having a > little > > > >> difficulty tho, it seems that the X member and engine mounts don't > line > > up > > > >> on side. I have a maddat fitting kit and brand spanking new engine > > mounts, > > > >> so the X member is reversed etc... > > > >> > > > >> When I bolt up the passenger side, the driver side mount is atleast > > 50mm > > > >out > > > >> of whack. If i were to put spacers in there then the holes would line > > up A > > > >> ok, so what am i missing? Should i have put spacers in before putting > > the > > > >> engine mounts on? I'm at a loss, all help very much appreciated. > > > >> > > > >> cheers, > > > >> Adam > > > >> > > > >> > > > > > > > > > > _____________________________________________________________ > > > Get Your free Ozdat Email Account > > > ---> http://www.ozdat.com > > > > > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
