Zac,
It's easy as you know to use the 180B tacho if you have a 1600 frame. The
wagon clock frame is very similar and can also be used but you have to trim
the 180B tacho face plate a bit to fit and you don't see the trimmed edge
when it's in. What's wrong with your tacho? No work at all or does it jump
all over the place? Check your wiring first of all especially the battery &
earth wires.

regards
Terry

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Zac Campbell
Sent: Sunday, 24 March 2002 12:17 AM
To: [EMAIL PROTECTED]
Subject: Re: Tacho Wiring


Terry I just take the guts/electronics and put this in the 1600 tacho
'frame'. Actually I don't know 100% that the 200b tacho fits but I have used
the 180b tacho in the past. For some reason I have had the 1600 tachos die
on me. current one is all wired up, just doesn't work!

zac

----- Original Message -----
From: Terry Rudd <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, March 23, 2002 11:11 PM
Subject: RE: Tacho Wiring


> Zac,
> I don't have one spare but I'll look out for you. The 200BSSS seem to be
> more prevalent at U-Pulls and they make a nice replacement for the 1600 as
> the speedo is a Klm version of the Mph 1024 speedo.
>
> TR
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Zac Campbell
> Sent: Saturday, 23 March 2002 11:15 PM
> To: [EMAIL PROTECTED]
> Subject: Re: Tacho Wiring
>
>
> Terry do you have a 180b or 200b tacho lying around? I was hoping to get
one
> from the local u-pull-it for cheap but there hasn't been one there for as
> long as I have been looking :(
>
> zac
>
>
>


--membersozdat-------------------------------------------------------
OZDAT Mailing List   Please Note:-
Send (un)subscribe requests to  [EMAIL PROTECTED]
Send  submissions to  [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------

Reply via email to