Ive had a L20b cam reground into 30/70 specs 280 degrees duration, and with slightly greater lift than std but not by much. Camshaft Engineering did it for me here in perth, about $100 for the job
Chris maldat writes: > I think the Z16,Z18 cam might be the same. > But I dont know about Z22,Z24 > > Malcolm > > Ross Goddard wrote: > > > O K so if you want a better cam in your L16 or L18 you go to the L20B > > grind. What about if you have a standard L0B and want a hotter cam? Do > > you have to go aftermarket or can you swap in a Z cam. > > > > When changing an L series cam what is involved? I've only pulled apart > > a L20B. Haven't put one back together yet. > > > > > > --membersozdat------------------------------------------------------- > > OZDAT Mailing List Please Note:- > > Send (un)subscribe requests to [EMAIL PROTECTED] > > Send submissions to [EMAIL PROTECTED] > > No unauthorised redistribution of this email > > http://www.ozdat.com/ozdatonline/index.htm > > http://www.ozdat.com/ozdatonline/listindex.html > > http://www.mail-archive.com/[email protected]/ > > --------------------------------------------------------------------- > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
