Terry yes they are 8 bolt, the same, i'm investigating the possibilty of using the 245mm clutch, as i can get them from PBR at a good price. The L series boxes have the same spline as I'm using a Z box in mine Peter ----- Original Message ----- From: "Terry Rudd" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, June 18, 2002 8:03 PM Subject: RE: Clutch
> Peter, > > You've got me, I didn't know the NA had a smaller clutch than the turbo but > it stands to reason I spose. As a matter of interest, is the NA crank 8 > bolt? (i.e. same as the turbo). I think Z18 has 225mm clutch too, and is it > 5 bolt or 6 bolt, it was missing off Tom's list (very informative post btw). > > Ross asked about splines etc. > Most of the input shafts on the gearboxes that we all play with are 24 > spline x 30mm and take a 25.4mm drive on the clutch. There are probably > exceptions to this also - commercials? I don't know a lot about these, but > generally Nissan L4/L6 boxes use the same clutch gear unlike A series boxes > that were all over the place. > > regards > Terry > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On Behalf Of Mr-Freeze > Sent: Tuesday, 18 June 2002 4:18 PM > To: [EMAIL PROTECTED] > Subject: Re: Clutch > > > hey terry > the 240mm from the FJ, must be turbo as the N/A is 225mm, just pulled Robs > out of my old car and measured it > > Peter > ----- Original Message ----- > From: "Terry Rudd" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Monday, June 17, 2002 11:54 PM > Subject: RE: Clutch > > > > Z24 clutch Navara etc is 240mm (same as FJ20), 225mm is from L24 > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED]]On Behalf Of mark krawczuk > > Sent: Monday, 17 June 2002 11:29 PM > > To: [EMAIL PROTECTED] > > Subject: Re: Clutch > > > > > > hi, how come my clutch from a 720 is 240 mm? dont u mean clutch not 225mm > > flywheel > > > > mark k > > ----- Original Message ----- > > From: "James Morrison" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Monday, June 17, 2002 10:27 PM > > Subject: Re: Clutch > > > > > > > a 225mm flywheel from a 720 ute and a 6cyl L clutch i reckon would do > the > > trick > > > > > > cheers > > > James > > > > > > --- Blown 510 <[EMAIL PROTECTED]> wrote: > > > >What would be the best clutch for rally and road driving and a few > > burnouts > > > >now and then. It will be behind either a work L18 or L20b. And 4 speed. > > In a > > > >1600. > > > > > > > > > > > >Thanks johno > > > > > > > > > > _____________________________________________________________ > > > Get Your free Ozdat Email Account > > > ---> http://www.ozdat.com > > > > > > _____________________________________________________________ > > > Promote your group and strengthen ties to your members with > > [EMAIL PROTECTED] by Everyone.net http://www.everyone.net/?btn=tag > > > > > > > > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
