Phew! I was worried you would give up on a pair of (usually) good carbs. Persistence pays. ----- Original Message ----- From: "Robert Charles Scealy" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, 9 September 2002 11:40 AM Subject: It runs!!
> Hey All, > > Thanks to all who helped me get the SUs going, after a hellish weekend I > finally got them running. The bloke at the local carby shop looked at > the floats, said it looked good, and to try a regulator - didnt work. So > I then changed the needle and seats in the bowl, tested each one hooked > up to the pump alone and they worked, great, except when they were > bolted up to the motor the old problem resurfaced - wtf, fuel leaking > out etc etc.. I thought about it, and the only difference was that when > I tested them individually the overflow fitting wasnt hooked up, when > bolted up I connected the overflows to the tank return line, so I > disconnected them, and it fixed the problem. So I potentially bought a > regulator and new needle/seats for nothing, but at least the job is done > properly now. > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
