Hi Richard, Excellent news - thanks. By what I was told, it was sounding like the head was now useless :( But I figured surely it could be fixed, and your info has confirmed that.
Re the RHF guard, at a glance it doesnt look the best because its in original condition. However my panel beater said thats a good thing, because what you see is what you get - nothing hidden. I recall it needed some straightening around the front - a patch about the size of a hand? I dont think it was very rusty either? I had it as a spare but you can have it for what I payed ($50). I know I have 1 nose mould also - cant remember if its L or R though. You or Luke are welcome to come around if you want. Andrew > > Andrew I will check my L18SSS block tonight for the "W" designation. > > The cam towers need to be correctly aligned to avoid cam chain stretching > problems and other things. You should be able to reassemble the towers in > alignment using a cam inserted to align them, however you need to ensure > the cam can be easily slid out without binding after the tower bolts have > been tightened to correct tension as they may be horizontally aligned, but > not vertically aligned, after tensioning. > > Give it a go and if there is some binding, play with the tower bolt > tensions a just a bit bit, to get them aligned correctly. Before assembly, > check the bolt holes have not been extruded slightly by previous > tensioning, if they have, remove any ridge at the top of the bolt hole with > a careful drill, not a file, before assembly. > > On another matter, Guess What, the panel shop fixing the car I discussed > recently can't get a RHF guard or any nose moulds. Is your RHF guard > repairable, and what sort of $$$ do you want for it? > > Rick Clough > Ph: 03 5172 2670 > email: [EMAIL PROTECTED] > > ********************************************************************** > Any personal or sensitive information contained in this email and > attachments must be handled in accordance with the Victorian Information > Privacy Act 2000, the Health Records Act 2001 or the Privacy Act 1988 > (Commonwealth), as applicable. > > This email, including all attachments, is confidential. If you are not the > intended recipient, you must not disclose, distribute, copy or use the > information contained in this email or attachments. Any confidentiality or > privilege is not waived or lost because this email has been sent to you in > error. If you have received it in error, please let us know by reply > email, delete it from your system and destroy any copies. > ********************************************************************** > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
