|
Heath,
6kg/mm
= 60 kg/cm = 335lb/in.
The
1200 arms are approx same ratio as Sunny so this would give a wheel rate of
about 285lb/in = 51 kg/cm
With
the Ca18DET these would be a good race rate spring, but maybe a little hard for
street use. You could get used to it :-) I have 300lb/in in my street sunny
coupe and they are OK for an hour or so, but the back gets a bit sore after 4
hour drives.
I just
did a set for a customer in Canberra, (CA18DET sunny) and they were
250lb/in for the street. A good firm rate for club days with a bit of
comfort still.
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]On Behalf Of Cleary Signs Sent: Friday, March 14, 2003 3:40 PM To: [EMAIL PROTECTED] Subject: Re: hey guys....LONG Errol, i have 6kg HKS springs at the
moment
i was told that they are 350lb,
does that sound right, i think they are going to be a
little stiff on the 1200
Heath
--membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[EMAIL PROTECTED]/ --------------------------------------------------------------------- |
- Re: hey guys.... Mark
- RE: hey guys.... E Smith
- Re: hey guys.... Ben C
- RE: hey guys....LONG E Smith
- RE: hey guys....LONG Geordie
- RE: hey guys....LONG E Smith
- RE: hey guys....LONG Geordie
- Re: hey guys....LONG Ben C
- Re: hey guys....LONG Chris Pronios
- Re: hey guys....LONG Cleary Signs
- Re: hey guys....LONG E Smith
- Re: hey guys....LONG Mark
- RE: hey guys....LONG E Smith
- Re: hey guys....LONG Mark
- Re: hey guys....LONG Ben C
- Re: hey guys.... Cleary Signs
