Put a pair of vice grips on the shaft centre (or small stilsens) and undo the nut then.
Cheers, Feral Errol Get Serious tm<http://www.datrats.com.au/> -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of [EMAIL PROTECTED] Sent: Monday, June 02, 2003 11:12 PM To: [EMAIL PROTECTED] Subject: Stuck swaybar Guys, today I was trying to remove the sway bar from my 1600. I got to the last bolt and found that no matter how many times I turned the damn thing it wouldn't loosen. So the thread is stuffed somehow. I tried briefly trying to jam a screwdriver in there but it still wouldn't unthread. To make it worse, I can't get a socket in there (it is the bolt between the bush and crossmember) so it is extremely hard to turn. Anyone got any other tips? I'm open to hacksawing but there is hardly any room!! Thanks in Advance, Zac --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[EMAIL PROTECTED]/ ---------------------------------------------------------------------
