I know colin ,but not the people at Hursts. Malcolm ----- Original Message ----- From: "E Smith" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, June 03, 2003 10:43 AM Subject: RE: L20B Revving problem
> I haven't bought anything from there for over 2 years. He rang me a few > weeks ago to see if I wanted some ford bits. > > The grille would be too expensive to ship on its own. I will see if I get > something from Hursts or Colin at Nissbits in the near future then I would > get it with that. > > Thanks > Feral Errol > Get Serious tm<http://www.datrats.com.au/> > > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Maldat > Sent: Tuesday, June 03, 2003 7:45 AM > To: [EMAIL PROTECTED] > Subject: Re: L20B Revving problem > > > I paid $50 for it and it has both yellow fog lights in it,but the centre > badge is missing. > are you still buying parts from here ,cos with its lenght it will not be > cheap to post infact the post shop will not take it ,it will have to be > freighted. > > How did you get on chris S.????? > I hear the tax man is after him big time and hes also narked on some people > over weeds.Not a liked fellow these days. > You know Kiwi auto parts here?Mr Lee well xmas time chris S got a wicked > kicking over by one of his workers. > > malcolm > P.S > I also have a spot light grille for a B210. > I'll give you both if you can get me a pair of 510SSS spot lights,well I > only really need one but a pair would be better. > > Malcolm > > > ----- Original Message ----- > From: "E Smith" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Monday, June 02, 2003 8:09 PM > Subject: RE: L20B Revving problem > > > > Mal, > > I have one in the but would be good to get another spare as mine has a > > crack. > > > > Cheers, > > Feral Errol > > Get Serious tm<http://www.datrats.com.au/> > > > > > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] Behalf Of Maldat > > Sent: Monday, June 02, 2003 8:14 AM > > To: [EMAIL PROTECTED] > > Subject: Re: L20B Revving problem > > > > > > Errol, > > Do you have a 310? if so > > would you be kken on a factory spot light grille for it? > > > > Malcolm > > ----- Original Message ----- > > From: "E Smith" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Sunday, June 01, 2003 11:27 PM > > Subject: RE: L20B Revving problem > > > > > > > Trev, > > > You realise the sunny 310 has to be faster due to superior rear axle (4 > > link > > > suspension) design, lower mass and lower CD ;-) > > > We will defeat the 510's!!! > > > > > > Feral Errol > > > Seriouser and Seriouser :) > > > > > > -----Original Message----- > > > From: [EMAIL PROTECTED] > > > [mailto:[EMAIL PROTECTED] Behalf Of trev > > > Sent: Sunday, January 06, 2002 2:21 AM > > > To: [EMAIL PROTECTED] > > > Subject: RE: L20B Revving problem > > > > > > > > > Yer Errol Bring it on. > > > > > > > > > > > > On Fri, 2003-05-30 at 09:11, E Smith wrote: > > > > Maybe I should replace my sunny cam with a stocky L20B item to beat > them > > > > Pooley boys? > > > > Feral Errol > > > > > > > > > > > > -----Original Message----- > > > > From: [EMAIL PROTECTED] > > > > [mailto:[EMAIL PROTECTED] Behalf Of Maldat > > > > Sent: Thursday, May 29, 2003 9:27 PM > > > > To: [EMAIL PROTECTED] > > > > Subject: Re: L20B Revving problem > > > > > > > > > > > > Stock L20B cam will pull 7500Rpm+ with no prob's. > > > > > > > > Malcolm > > > > ----- Original Message ----- > > > > From: "trev" <[EMAIL PROTECTED]> > > > > To: <[EMAIL PROTECTED]> > > > > Sent: Thursday, January 03, 2002 3:43 AM > > > > Subject: RE: L20B Revving problem > > > > > > > > > > > > > Only thing I can think of is if the cam is a stock grind 5000rpm is > > > > > about all you'll get power wise. This is all my L20B with 10:1 comp, > > > > > ported head with 44mm inlets, twin 45mm weber carbs and series 2 > bluey > > > > > ignition could do. > > > > > > > > > > Cheers > > > > > Trev > > > > > > > > > > > > > > > On Sat, 2003-05-24 at 21:03, Anthony M. Reid wrote: > > > > > > remeber that i'm in the uk and we never got the 200B here except > for > > > > > > mine which was imported in 1987, the carbs are off a L18T 1979 > 180B > > > SSS > > > > > > (810) was thinking of getting the carbs retuned on rolling road > > > > > > The disy i have is bosch and the number on are > > > > > > 9 230 064 519 > > > > > > U-PGFU 4 > > > > > > 22100-V9600 > > > > > > 347 > > > > > > Thats all the number i can see on the casing of the disy > > > > > > > > > > > > -----Original Message----- > > > > > > From: [EMAIL PROTECTED] > > > > > > [mailto:[EMAIL PROTECTED] Behalf Of Maldat > > > > > > Sent: Saturday, May 24, 2003 6:42 AM > > > > > > To: Anthony M. Reid > > > > > > Subject: Re: L20B Revving problem > > > > > > > > > > > > > > > > > > Twin SU's (nissan) were never made for a L20B. > > > > > > 1979 810SSS is a L18 with twin carbs. (180B) > > > > > > My L20B is from a 200B 810 the car was badged as SSS,fluffly seats > > and > > > a > > > > > > rev > > > > > > counter is about the only difference.It only had a single carb. > > > > > > > > > > > > Whats the dizzy number and I should be able to tell you from what > > car > > > > > > and > > > > > > what year. > > > > > > > > > > > > Try lifting your needles about 1mm at a time make sure you do both > > the > > > > > > same. > > > > > > > > > > > > > > > > > > ----- Original Message ----- > > > > > > From: "Anthony M. Reid" <[EMAIL PROTECTED]> > > > > > > To: "Ozdat" <[EMAIL PROTECTED]> > > > > > > Sent: Friday, May 23, 2003 11:58 PM > > > > > > Subject: RE: L20B Revving problem > > > > > > > > > > > > > > > > > > Hi Steve, > > > > > > > > > > > > I still have the air filter on the su's the carbs don't have the > > > screws > > > > > > at the bottom, The su's i have cam from an 1979 810 SSS and have > the > > > > > > small tiangle parts with the balance pipe for the mixture (i can > > post > > > a > > > > > > picture on my site if that helps) > > > > > > If i post a picture on my site of the disy i have could you guys > > have > > > > > > alook at it and maybe confirm it's for a L20B? > > > > > > > > > > > > thanks > > > > > > anthony > > > > > > > > > > > > -----Original Message----- > > > > > > From: [EMAIL PROTECTED] > > > > > > [mailto:[EMAIL PROTECTED] Behalf Of Steven > > > Copcutt > > > > > > Sent: 23 May 2003 12:26 > > > > > > To: Anthony M. Reid > > > > > > Subject: Re: L20B Revving problem > > > > > > > > > > > > > > > > > > Anthony , have you tried running with out your air filters ? ( I > had > > a > > > L > > > > > > 20 > > > > > > with twin webers that would stop at 5000 rpm , took the air > filters > > > off > > > > > > and > > > > > > it went straight to 7500 rpm ). > > > > > > secondly how many turns out are your mixtures screws on the > bottom > > of > > > > > > the > > > > > > su's ? > > > > > > I used to run 1 and a half for normal driving , and about 2 and a > > > > > > quater > > > > > > for harder driving ( night runs / general fun ) this lets the twin > > > su's > > > > > > rev > > > > > > harder , but idles a bit richer , just remember to change them > back > > > and > > > > > > vice > > > > > > a versa > > > > > > my 2 cents worth , hope it helps > > > > > > > > > > > > Steve Darwin > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > trev <[EMAIL PROTECTED]> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > trev <[EMAIL PROTECTED]> > > > > > > > > > > > > > > > > > > > > > > > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[EMAIL PROTECTED]/ ---------------------------------------------------------------------
