I used a mazda tensioner that I bought from Stuart Wilkins Motorsport in Sydney. All I had to do was make up my own gasket, which wasnt a drama.
Check Ya,
Damo.
>From: "amr" <[EMAIL PROTECTED]>
>Reply-To: [EMAIL PROTECTED]
>To: "Ozdat" <[EMAIL PROTECTED]>
>Subject: RE: Urgent FJ questions
>Date: Mon, 7 Jul 2003 11:42:33 +0100
>
>ok so what would these cars be in the uk?
>
>-----Original Message-----
>From: [EMAIL PROTECTED]
>[mailto:[EMAIL PROTECTED] Behalf Of ryanmel
>Sent: 07 July 2003 11:27
>To: amr
>Subject: Re: Urgent FJ questions
>
>
>it's off of a ford econovan or mazda e2000 van
>there is no mods needed, it bolts straight in, the
>big difference is that it is ratchet type. i found by
>using genuine ford or mazda you get a better
>quality ratchet than using the cheap repco ones
>you'll pay $50 for a tensioner, but i reckon it will
>last longer.
>i can get you the part number if you want but if
>you ring up ford or mazda and ask for the tensioner
>for the cars i mentioned above, it looks identical
>to the l-series, fj series tensioner, the difference is
>it's ratchet. it looks identical to a mitsubishi magna
>one actually, we sell a few of those. i should take
>one into work and compare, might be another match
>
>----- Original Message -----
>From: "amr" <[EMAIL PROTECTED]>
>To: "Ozdat" <[EMAIL PROTECTED]>
>Sent: Monday, July 07, 2003 1:53 PM
>Subject: RE: Urgent FJ questions
>
>
>Hi Feral
>
>is the "CT48" the part number? also is there any modifing needed to it?
>
>Thanks
>Anthony
>
>-----Original Message-----
>From: [EMAIL PROTECTED]
>[mailto:[EMAIL PROTECTED] Behalf Of E Smith
>Sent: Sunday, July 06, 2003 10:39 PM
>To: amr
>Subject: RE: Urgent FJ questions
>
>
>Its a Mazda "CT48" tensioner Top one only.
>
>Cheers,
>Feral Errol
>Get Serious tm
>
>
>
>-----Original Message-----
>From: [EMAIL PROTECTED]
>[mailto:[EMAIL PROTECTED] Behalf Of amr
>Sent: Monday, July 07, 2003 4:26 AM
>To: Ozdat
>Subject: Urgent FJ questions
>Importance: High
>
>
>HI guys
>
>I got a small questioned on the FJ timing setup, I'm in the middle of a
>rebuild and there was talk of using a Mazda tensioner (anyone got the
>part number) I have found than there is 2 do I need to change both for
>the mada one or is it just the top one??
>
>I will be great full for a quick answer
>
>Thanks
>Anthony
>
>--membersozdat-------------------------------------------------------
>OZDAT Mailing List Please Note:-
>Send (un)subscribe requests to [EMAIL PROTECTED]
>Send submissions to [EMAIL PROTECTED]
>No unauthorised redistribution of this email
>http://www.ozdat.com/ozdatonline/index.htm
>http://www.ozdat.com/ozdatonline/listindex.html
>http://www.mail-archive.com/[EMAIL PROTECTED]/
>---------------------------------------------------------------------
