mitsubishi magna is exported as the diamante the mazda and ford come under the whole commercial van type car with 1.8 and 2.0 litre petrol motors approximately 1982-1990 model
----- Original Message ----- From: "amr" <[EMAIL PROTECTED]> To: "Ozdat" <[EMAIL PROTECTED]> Sent: Monday, July 07, 2003 6:42 PM Subject: RE: Urgent FJ questions ok so what would these cars be in the uk? -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of ryanmel Sent: 07 July 2003 11:27 To: amr Subject: Re: Urgent FJ questions it's off of a ford econovan or mazda e2000 van there is no mods needed, it bolts straight in, the big difference is that it is ratchet type. i found by using genuine ford or mazda you get a better quality ratchet than using the cheap repco ones you'll pay $50 for a tensioner, but i reckon it will last longer. i can get you the part number if you want but if you ring up ford or mazda and ask for the tensioner for the cars i mentioned above, it looks identical to the l-series, fj series tensioner, the difference is it's ratchet. it looks identical to a mitsubishi magna one actually, we sell a few of those. i should take one into work and compare, might be another match ----- Original Message ----- From: "amr" <[EMAIL PROTECTED]> To: "Ozdat" <[EMAIL PROTECTED]> Sent: Monday, July 07, 2003 1:53 PM Subject: RE: Urgent FJ questions Hi Feral is the "CT48" the part number? also is there any modifing needed to it? Thanks Anthony -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of E Smith Sent: Sunday, July 06, 2003 10:39 PM To: amr Subject: RE: Urgent FJ questions Its a Mazda "CT48" tensioner Top one only. Cheers, Feral Errol Get Serious tm<http://www.datrats.com.au/> -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of amr Sent: Monday, July 07, 2003 4:26 AM To: Ozdat Subject: Urgent FJ questions Importance: High HI guys I got a small questioned on the FJ timing setup, I'm in the middle of a rebuild and there was talk of using a Mazda tensioner (anyone got the part number) I have found than there is 2 do I need to change both for the mada one or is it just the top one?? I will be great full for a quick answer Thanks Anthony --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[EMAIL PROTECTED]/ ---------------------------------------------------------------------
