Sorry, i forgot to add that i use anti-seize grease instead of normal grease because you only need a little bit as it goes a long way.
Kris. ----- Original Message ----- From: "Robert Charles Scealy" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, September 27, 2003 3:30 PM Subject: Re: Clutch > Thanks Kris. I put it together the other day without doing any greasing. > Now sometimes when I have my foot on the clutch and move into first the > box will go crazy, like there is still drive going to it. Do you think > not greasing things could be contributing to this crazy behaviour? > > On Sat, 27 Sep 2003, Kristian Walsham wrote: > > > Yes you can. Just a smear will do so it doesn`t fling off. Also don`t forget > > to grease the tip of the shaft that goes into the spigot bearing in the > > centre of the crank. > > > > Kris. > > ----- Original Message ----- > > From: "Robert Charles Scealy" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Saturday, September 27, 2003 2:10 PM > > Subject: Clutch > > > > > > > Hi All, > > > > > > Are you supposed to grease the input shaft from the gearbox before you > > > slide the clutch on? > > > > > > Regards, > > > Bob > > > > > > > > > > > > > > > > > > > > > > > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[EMAIL PROTECTED]/ ---------------------------------------------------------------------
