Another thing we did was loosen the cross member and then put a jack under the water pump pulley, it dropped the back of the engine down an inch and then made the angle nice. Also guys before I meant 2.2L not 2.4L
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Jeff Oldham Sent: Monday, 29 September 2003 1:58 PM To: [EMAIL PROTECTED] Subject: RE: Clutch maybe I can just undo the extractors from the head what do you guys reckon will that give enough clearance or allow enough movement ? ta Jeff You need to tip the motor back a bit so the gearbox comes out so the exhaust needs to be disconected to allow this to happen. Jeff Oldham wrote: > I have to remove the gearbox soon in my 1600 > problem with second gear & prolly needs a new clutch (: > > anyway, > i have read that you need to undo the exhaust manifold to get the gearbox > out > is this correct ? > my exhaust is 2 & 1/2 inch welded to extractors so can't be removed easily > > ta Jeff > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[EMAIL PROTECTED]/ ---------------------------------------------------------------------
